Scale Model Fittings: AJ Fisher – No. 71, 2020

To you craftsmen who love ships te here’s a world of satisfaction in creating accurate replicas of old and new ships_- clippers, yachts, frigates, tugs andfreighters. You who are about to undertake yourfirst model, as well as you who have been building for years, willfind something herein that will interest you. Our sincere wish ts that through this catalog we may be of real help to you in creating your models- and that this will be the beginning of a friendship that will long endure. About A. J. Fisher A. J. Fisher was founded in 1925 by Archibald J. Fisher. Archibald was a seaman who plied the Oceans and Great Lakes as a chief engineer. Mr. Fisher ran the business until he passed away in 1957. Raymond Irwin bought the business at that time and in 1960 Robert Irwin, his son, joined him when he left the service. Robert took over A. J. Fisher when his father retired in 1974. Robert continued A. J. Fisher until 2001 when he retired. A. J. Fisher has been owned by William Partridge since 2003. Our goal is to maintain the fine quality ship model kits produced for over 90 years and to update and reissue over 20 of the original A.J. Fisher classic solid hull ship model kits. The A. J. Fisher fittings listed in this catalog are cast in pewter unless otherwise noted. Whether you are about to begin your first model or if you have been building models for years we hope there is something in the A. J. Fisher ship model line of kits that will help you in creating your models. For the scratch model builder we offer a wide selection of fittings, supplies, plans, and cases. Our commitment is to help you reach your modeling goals! A. J. Fisher 3 1/2 Center Street Newburyport, MA 01950 tel: 978-462-4555 fax: 978-462-2589 www.ajfisher.com Located in the Piel Craftsmen building Reproduction of this catalog in whole or part without written permission of A. J. Fisher is prohibited. © copyright —A. J. Fisher 2020 3/20 SHIP MODEL KITS All ship model kits contain: a pre- carved hull, stripwood and dowels, fittings, rigging line, a a) complete set of plans, instruction ae guide book, display base and p e d est a Is . er A. J. Fish e 4 \nstruction Guid on Le Champi Great Lakes TUS (1868 x # No sailmaking supplies are in the kits. Sailmaking kits are sold separately. SAILMAKING KITS All sailmaking kits contain: sailmaking instruction, sail material, extra fittings, rigging line, needles, thread, and needle threaders appropriate for each type of kit. |. a A J Fisher i 9 ay) ~~~ ~~ 1-978-462-4555 eve Classic-Solid-Hull . Wooden Ship Model Kits en — rms ee ee ee ee – “Dancing Feather” Boston Pilot Schooner 1853 The Dancing Feather was designed by Dennison J. Lawlor and built in East Boston at the Winde & Clinkard shipyard in 1853. She was designed with a clipper style bow that was popular with the “sharpshooter” class fishing schooners and raked mast, reminiscent of the famed Baltimore Clippers. She worked in the competitive Boston Pilot trade for several years and eventually was sailed to California where she was engaged in the pilot and salvage trade. ; Complete Kit: Scale: $180.00 3/16” = 1’ Hull Length: 12 3/4” Overall Length: Plans: Available separately: ; $37.00 Instruction Book: ; 20 1/2” ; Sailmaking Kit $34.95 “John McKeon” New York Pilot $16.95 Schooner 1838 The John McKeon was built on Long Island, New York by Isaac Webb in 1838.She was one of the larger pilot vessels built by the Isaac Webb ship yard with an overall length of 78’ and a beam of 20′ 7”. Due to the competitive nature of piloting, boats had to venture further and further out to sea in order to obtain work. These boats needed to be simplistic and easy to handle since the head boat handler was the only man left on board after she was “manned out” and returned to the harbor. The John McKeon had a Complete Kit: $170.00 short and tragic life, going down with all hands during a hurricane in July 1839. Available separately: Plans: Instruction Book: $30.00 $16.95 Scale: 1/9’ = 1? Hull Length: Overall Length: 9 1/2” 12 1/2” Sailmaking Kit q A J Fisher Se i 3 3¢ Ky) $24.95 1-978-462-4555 Classic. Solid-Hull . Wooden -Ship Model Kits “Miss Lou” Biloxi Schooner 1919 During the period from 1870 to 1930, the shipyards of Biloxi, Mississippi produced over 253 sailing schooners for fishing and the freight industry. The Miss Lou represents the apex of traditional flat bottom centerboard Biloxi style schooners of the Gulf Coast. She was built by the famed boatyard of Anson Hoiley in 1930. She measured 70’ long and weighed 42 tons and carried Hoiley’s famous clipper bow and curved transom. The Miss Lou story came to an official end when she was broken up in 1971. . Complete Kit: $215.00 Available separately: Plan: $40.00 Instruction Book: $16.95 Scale: 1/4” Overall Length: 26” Hull Length: ; ; 16” = 1’ ; Sailmaking Kit $24.95 “Lark” Baltimore Clipper 1812 The Baltimore Clipper traces it’s roots as far back as the 1730’s. These sharp, fast and weatherly vessels reached their zenith in design around 1810. So successful was the design that a single class was declared for this naval model and from 1813 to 1854 most naval sloops, brigs and schooners were designed with the Baltimore Clipper in mind. William Doherty a leading naval designer from 1812-1837 is considered the father of the Baltimore Clipper Model. This model of the Lark is a typical Clipper/Privateer of her time, carrying a battery of six-6 pounders and one 12 pounder. Complete Kit: $215.00 Scale: 1/8” Hull Length: 12 1/2” Overall Length: 20” Sailmaking Kit = 1’ $24.95 Available separately: é Plans: $40.00 Instruction Book: $16.95 A J Fisher Va A hy 1-978-462-4555 . Classic: Solid Hull. pF Wooden Ship Model Kits —* ” “Challenge” Great Lakes Schooner 1852 Before the present day 600 ft. bulk freighters all shipping was carried on schooners. The first distinctive lake schooners were the shoal draft, centerboard, “clipper” type vessels introduced by William Bates, of Manitowoc, Wisconsin in 1851-52. While on the stocks, the Challenge raised many questions from other local builders, but after her launch she proved to be one of the great success stories, so much so that larger versions were introduced such as the “Clipper City” and the “Montowoc.” For many years the two masted clipper schooner monopolized the lakes trade until they grew so large it was necessary to rig them with three or Complete Kit: four masts. $170.00 Scale: Available separately: $35.00 Plans: Instruction Book: Hull Length: Overall Length: $16.95 1/8” = 1’ 11%” 16 %” ; ; ; Sailmaking Kit : $24.95 “Lucia A. Simpson” Three Mast Great Lakes Schooner 1875 The Lucia A. Simpson was built in 1875 by Rand & Burger in Manitowor, Wisconsin and was one of the last full-rigged schooners of the Great Lakes. In May of 1929 she was disabled in a squall off Algoma and then towed to Sturgeon Bay for repairs. On Dec. 3, 1935, a fire swept the “graveyard of ships” of the Sturgeon Bay Ship Building Company and destroyed her. In the 1870’s there were from 1700 to 1800 of these Lake Schooners of various sizes engaged in the lake trade, carrying coal, ore, grain and general cargo. Complete Kit: $325.00 They were a type built solely for the lake trade: practically all of them had centerboards. Available separately: Plans: Instruction Book: $55.00 Scale: 3/16” = 1’ Overall Length: 36” Hull Length: $24.95 25” Sailmaking Kit Le 58 & $49.95 1-978-462-4555 ; Classic: Solid Hull . ¥ Wooden Ship Model Kits —* 3 | Brig “Niagara” ‘ie Oliver Perry’s Flagship 1812 | The Niagara was the last of 6 ships built in a bay of Lake Erie. She was launched on July 4″ 1813 by a }N | 7 aa, | technique called kedging, using her anchor to pull her te TAT 5 ; onto a sandbar that protected the bay where she was built. During the Battle of Lake Erie in 1813, sane Neos Commodore, Oliver Hazard Perry was forced to move from the Lawrence to the Niagara making her his . flagship. On the Niagara he secured victory over the British which ensured American control of the Great lakes during the War of 1812. In poor condition, the Navy allowed her to sink in 1820. In April of 1913, the Niagara was raised from Misery Bay and went Complete Kit: through several restorations. She is one of two $255.00 remaining vessels that served in the War of 1812. Scale: Hull Length: Available separately: $55.00 Plans: Instruction Book: Overall Length: $18.95 1/8” = 1’ 14 %4” 20 Sailmaking Kit $39.95 “Champion” Great Lakes Tug of 1868 The Champion was said to be the largest tug ever built for fresh waters in 1868. Built by Campbell and Owen of Detroit, she possessed very comfortable accommodations for officers, much better than had been seen in the past. The Champion is known to have drawn eight schooners heavily loaded with wheat in a record tow of 1881. She met her demise on September 15th, 1903 as she burned to the water’s edge. At this time she was owned by H. W. Baker of Detroit. She was towed to a reef near Gibraltar by the little steamer JAN, where she sank in about 10 feet of water. $240 00 Complete Kit: A year later much of her fittings and machinery were ” removed. But her hull was seen as a total loss and not considered worthy of repair. Available separately: Plans: . . Instruction Book: J Fisher $30.00 Scale: Hull Length: $18.95 Overall Length: va 6 AJ yas eel 18” 18” 1-978-462-4555 Classic. Solid-Hull . Wooden Ship Model Kits “Trawler” The steam trawler was used for fishing by dragging a wide mouth fishing net over the sea bottom. During the war the trawlers were used as mine sweepers and patrol boats to protect our harbors. Scale: Complete Kit: 1/8″ = 1’ Hull Length: 13” Overall Length: 13” $240.00 Available separately: Plans Instruction $30.00 $16.95 “Edna G” The Edna G was built in 1896 by the Cleveland Ohio Ship Building company. She was one of the most powerful tugs of the time. The tug is 110 feet long, 23 feet across the beam and draws 15.5 feet of water. She was named after the daughter of then president of the railroad Jacob Greatsinger. She operated out of Two Harbors all her life, except for two years 1917-1919, during WWI when the government requisitioned her to move barges and troop ships out on the east coast. In 1974 the Edna G. was placed on the National Historic Register. The re-fitting of the great lakes freighters with bow thrusters and variable pitch propellers eliminated the need for tugboats in the Complete Kit: $240.00 ‘ A J Fisher 1/8″ = 1’ Scale: . Available separately: Plans Instruction harbors. Hull Length: $30.00 $16.96 43” Overall Length: i 7 a) 1-978-462-4555 13” & Model Fittings Anchors Item # Description AJF-001 Old Style Rnd Shaft (2 pieces) Qty | Length | Price 1 yA” $2.35 AJF-002 | Old Style (2 pieces) 1 3A” $2.35 AJF-003 1 ” $2.40 | Old Style (2 pieces) 1 1” $2.50 AJF-005 _ |} Old Style (2 pieces) 1 1%” $2.85 AJF-006 1 1 5/16” $2.95 AJF-006-1 | Old Style (2 pieces) Sm stock 1 1 5/16” $2.95 AJF-007 | Old Style (2 pieces) 1 1 5%” $3.10 AJF-008 _ | Old Style (2 pieces) 1 1 3%” $3.25 AJF-009 1 2” $4.95 1 1%” $3.50 1 1%” $4.50 AJF-010 | Navy Style Anchor 1 3A” $1.95 AJF-011 1 ym” $2.40 1 3” $3.00 AJF-004 AJF-013 Old Style Squ Shaft (2 pieces) Old Style (2 pieces) Lg stock Fisherman Style (2 pieces) | Old Style without stock AJF-013-1 | Spanish Style with stock Navy Style Anchor AJF-012 | Navy Style Anchor (2 pieces) AJF-014 Kedge Style Iron Stock 1 1%” $2.80 AJF-015 Kedge Style Iron Stock 1 1%” $2.65 AJF-016 Kedge Style Iron Stock (3 pcs, ring) 1 1%” $2.85 AJF-017 Kedge Style Iron Stock (3 pcs, shackle) | 1 1%” $2.85 AJF-018 Kedge Style Iron Stock fixed 1 1%” $3.00 AJF-018-1 | Kedge Style Iron Stock fixed 1 1 4%” $4.00 AJF-019 Kedge Style Iron Stock (3 pcs, shackle) 1 1 4%” $3.15 AJF-020 Kedge Style Iron Stock (3 pcs, shackle) 1 1 4%” $3.40 Barrels/Casks Item # 2 3A” yy” 2 7” Vp” Water Barrel without cradle | 2 S16″ 4” Water Barrel without cradle 2 916” 16” | Water Barrel without cradle 2 Ya” 34” 34” $3.15 AJF-025 | Water Barrel with cradle 2 3” 16” Ya” $3.00 AJF-026 | Water Barrel with cradle 2 5” V2” 34” $3.70 AJF-027 AJF-027-1 : A J Fisher Qty | Length | Height | Width |} Price AJF-022 | Water Cask-Clipper Style AJF-024 a Description AJF-021 | Water Cask-Clipper Style * 8 Aj 1-978-462-4555 Ya” $3.10 Sie” | $3.50 Ya” | $2.80 Sie” | $2.95 & Model Fittings D ltem # Description MS-0386 Barrel-wood Qty | Length | Height | Price 6 MS-0387 __| Barrel-wood 6 76″ Sie | $4.99 MS-0388 _| Barrel-wood 6 35/64″ 15/39″ | $4.99 MS-0389 | Barrel-wood 6 43%g4″ 19/39″ | $4.99 7,” 34” $4.99 Belaying Pins – Brass ltem # Description Qty | Length | Price MS0412 Belaying pin-brass 20 3/16″ $4.99 MS0410 Belaying pin-brass 20 5/16″ $4.99 MS0411 Belaying pin-brass 20 ‘5/g9’ | $4.99 Belaying Pins – Walnut ltem # Description Qty | Length | Price AJF-485 | Belaying pin-walnut 6mm 20 YA” $3.99 AJF-486 | Belaying pin-walnut 8mm 20 5/16″ $3.99 AJF-487 | Belaying pin-walnut 10mm | 20 yy” $3.99 AJF-488 | Belaying pin-walnut 14mm | 20 9/16″ $3.99 AJF-489 | Belaying pin-walnut 16mm | 20 %” $3.99 Belaying Pins – Boxwood ltem # Description Qty | Length | Price AJF-490 | Belaying pin-boxwood 6mm 20 Ya” $3.99 AJF-491 | Belaying pin-boxwood 8mm _ | 20 5/16″ $3.99 AJF-492 | Belaying pin-boxwood 10mm |} 20 ¥” $3.99 AJF-493_ | Belaying pin-boxwood 14mm | 20 16 | $3.99 AJF-494 | Belaying pin-boxwood 16mm | 20 %” $3.99 Belaying Pins – Pewter ltem # ) Description Qty | Length | Price AJF-028 | Belaying pin-pewter 12 34” $3.50 AJF-029 | Belaying pin-pewter 12 716″ $3.75 Belaying Pins – Bronzed Brass Item # Description Qty | Length | Price AJF-620 | Belaying pin-bronzed brass 7mm | 12 YA” $5.20 AJF-621 Belaying pin-bronzed brass 9mm | 12 yy” $5.50 AJF-622 Belaying pin-bronzed brass 12mm] 12 15/39″ $5.75 1-978-462-4555 & Model Fittings Bell ltem # Description Qty Dia. AJF-030 | Bell 1 3116” 3116” $1.35 AJF-031 | Bell 1 116” ¥” $1.50 ltem # Description Height | Price Qty | Length | Height | Price AJF-032 | Belfry 1 16″ Ya” $1.35 Binnacles [Wr Ip | ltem # | ma! Description Qty | Length | Height | Width | Price AJF-036 | Binnacle Old Style | 1 rh ORO | AJF-037 | Binnacle Clipper Style | tem # 716” 1 | %e Description Yo” | V4” | $2.00 | $2.25 | Qty Dia. AJF-038 | Binnacle, Style | 1 311g” Height | Price Ya” $2.35 AJF-039 | Binnacle, Style | 1 516″ 3A” $2.55 AJF-040 | Binnacle, Style II 1 5/39” Yo” $2.35 AJF-041 | Binnacle, Style II 1 Ya” yy” $2.55 Bitts (Bollards) – Angled tem # Description Qty | Length | Height | Price AJF-046 | Bitt-Angled 2 3A” 3” $5.90 AJF-047 | Bitt-Angled 2 1 1/3” V2” $6.50 Bitts – Cross q A J Fisher Item # Description AJF-051 | Bitt-Cross AJF-052 | Bitt-Cross AJF-053 | Bitt-Cross aiv Of 10 K 4 A Qty | Length | Height | Price NO} ROPPO iP 3,” Ya” 3/16” 1-978-462-4 978-462-4555 5/16” Ya” VY,” $3.00 $2.75 $2.25 & Model Fittings Bitts (Fife Rail) – Square ltem # Description Qty | Length | Height | Price AJF-056 | Bitt-square top square | 2 1/46″ 5/16″ $2.60 AJF-057 | Bitt-square top square | 2 15/46″ ye” $2.90 R” Yo” $3.30 AJF-058 | Bitt-crown top square 2 Bitts (Fife Rail) – Schooner AJF-059 | Fife Rail U-shape with 2 stanchions | 1 13/46) %” $8.50 AJF-060 | Fife Rail U-shape with 3 stanchions | 1 1” %” $9.00 Boom Rest Item # <>» Description AJF-044 | Boom Rest VT AJF-045 | Boom Rest Qty | 1 1 Dia. 3/16” | Price $1.50 %” | $2.00 Bucket – Water ltem # Description Qty | Length | Price AJF-048 | Bucket-water pewter | 6 3/16″ $6.99 MS0354 | Bucket-water wood MS0360 | Bucket-water wood 2 5/16” $4.99 2 15/39″ $4.99 Bullseye – Walnut Item # Description Qty | Length | Price MS2460 | Bullseye Walnut 24 330″ | $4.99 MS2461 | Bullseye Walnut 24 964″ | $4.99 MS2462 | Bullseye Walnut 24 3/16″ $4.99 AJF-496 | Bullseye Boxwood 12 3/32” _| $3.99 AJF-497 | Bullseye Boxwood 12 964 | $3.99 AJF-498 | Bullseye Boxwood 12 316 | $3.99 Bullseye – Boxwood 1-978-462-4555 & Model Fittings Bitts (Bollards) Item # aK 2 15/46″ 9/16” 3/16″ $4.40 2 ya” 716° 9/32″ $4.00 AJF-063 | Bitt-oval 1 1%” Ki 116″ $3.25 | 2 | – | Se | Bitt-round 2 yy” 5/32” Ye” | $2.80 AJF-066 Bitt-round 2 %3” yg” %” | $4.40 AJF-067 Bitt-round 2 1” YA” | $4.50 AJF-068 Bitt-round 1 1%” v4” %” 716° 36° | $3.75 76° | $2.80 2 ye” 3/16″ Ys” _| $2.80 AJF-070_ | Bitt-round dbl. (angle support) | 2 %” yy” 7132” | $4.55 AJF-067-1 AJF-069 | AJF-071 Bitt-round Bitt-round 2 %” Bitt-round dbl. 2 34” 2146″ 9ig0r | $4.95 AJF-072 | Bitt-round dbl. 2 13/46″ V2” YM” | $5.25 AJF-075_ | Bitt-round dbl. 2 Whe V2” YM” | $5.15 | AJF-073 | Bitt-round – outer hooks | AJF-074 | Bitt-single bulwark | % | $2.90 | AJF-065 Bio a1 Qty | Length | Height | Width | Price AJF-062 | Bitt-oval | AJF-064 | Bitt-roundsinge : HEL Description AJF-061 | Bitt-oval | 2 | # | »% | w | $4.50 | | 2 | % | tne | %” | $5.20 | | AJF-076 | Bitt-dbl bulwark w/supports [| 1 | 16 | % | %” | $5.75 | Blocks – Single ltem # () : A J Fisher Description Qty | Length | Price AJF-450 | Single walnut block 2mm 20 3/30″ AJF-451 Single walnut block 3mm 20 Ye” | $3.99 $3.99 MS0303 __| Single walnut block 4mm 40 532” | $4.99 AJF-452 | Single walnut block 5mm 20 36 | $3.99 AJF-453 Single walnut block 7mm 20 9130 | $3.99 MS0306 __| Single walnut block 10mm 40 | 13/20″ | $4.99 AJF-471 AJF-470 _ | Single boxwood block 2mm Single boxwood block 3mm 20 | 32 | $3.99 20 YQ” $3.99 AJF-472 | Single boxwood block 5mm 20 316 | $3.99 AJF-473 20 932 | $3.99 | Single boxwood block 7mm i 12 Aj 1-978-462-4555 & Model Fittings Blocks – Double ltem # Description Qty | Length | Price AJF-454 | Double walnut block 3mm 15 Ye” $3.99 MS0309 | Double walnut block 4mm 30 5132” | $4.99 AJF-455 | Double walnut block 5mm 15 316 | $3.99 AJF-456 | Double walnut block 7mm 15 932″ | $3.99 MS0312 | Double walnut block 10mm 30 | 1330″ | $4.99 AJF-475 | Double boxwood block 3mm 15 YQ” $3.99 AJF-476 | Double boxwood block 5mm 15 316 | $3.99 AJF-477 | Double boxwood block 7mm 15 9732” __| $3.99 AJF-457 | Triple walnut block 5mm 10 316 | $3.99 AJF-458 | Triple walnut block 7mm 10 9732” | $3.99 AJF-478 | Triple boxwood block 5mm 10 316 | $3.99 AJF-479 | Triple boxwood block 7mm 10 932″ | $3.99 | $4.99 Blocks – Triple Blocks – Heart MS0707 | Heart walnut block 20 932″ MS0708 | Heart walnut block 20 | 13/30″ | $4.99 Blocks – Sister AJF-435 | Sister block-single walnut 7mm 4 9130 | $3.99 AJF-436 | Sister block-single walnut 10mm 4 13/39” | $3.99 MS1313 | Sister block-triple walnut 8mm 2 516″ | $3.99 MS1314 | Sister block-triple walnut 12mm 2 15/39″ | $3.99 AJF-515 | Block, working brass 2 5/32” | $4.99 AJF-516 | Block, working brass 2 %” | $6.99 Blocks – Brass q A J Fisher ew 1-978-462-4555 & Model Fittings – Canopy Cover ltem # Description Qty | Length | Height | Price AJF-101 | 8 sided canopy cover (Champion) | 1 1 3/16” | %” $4.50 Capstans Item # it ri Description Qty | Length | Price AJF-102 | Capstan-Single action 1 S16 AJF-103 | Capstan-Single action 1 yy” | $1.30 $1.50 AJF-104 | Capstan-Single action 1 7e | $1.85 AJF-106 | Capstan-Single action 1 “A” $1.25 | AJF-105 | Capstan-Double action | 1 | %6 | $2.10 [ AJE-109 | Capstan Old Style l 1] @ [$2.25 Cannons – Dummy | A J Fisher litem # Description Qty | Length | Price AJF-077 Cannon, Dummy 4 3/16″ $3.95 AJF-077-1 Cannon, Dummy 4 4 V2” 5/16″ $5.75 AJF-079 Cannon, Dummy 4 76° $5.25 AJF-080 Cannon, Dummy 4 9116″ $6.75 AJF-080-1 Cannon, Dummy 2 1” $4.50 AJF-078 We 14 Ky Cannon, Dummy 1-978-462-4555 ; $4.25 S&S Model Fittings Cannons (rl — ltem # Description Qty | Length | Price AJF-081 Cannon with carriage 4 3” AJF-082 Cannon with carriage 2 1” AJF-083 Cannon with carriage 2 1%” AJF-083-1 | Cannon with carriage 2 13%” | $17.50 AJF-085 Cannon barrel 2 1%” | $6.45 AJF-086 Cannon barrel 4 Yo” AJF-087 Cannon barrel 4 3” AJF-088 Cannon barrel 2 1%” AJF-089 Cannon barrel 4 5,” $9.00 $10.00 | $15.00 $6.00 $7.60 | $6.75 $6.50 AJF-570 | Bronze Cannon with wooden carriage 30mm 1 1 3/16” | $4.25 AJF-571 | Bronze Cannon with wooden carriage 40mm 1 1 %/16” | $4.75 AJF-572 | Bronze Cannon with wooden carriage 50mm 1 2” $5.50 AJF-093 | Carronade barrel and carriage 4 %” $8.80 AJF-094 | Carronade barrel and carriage 2 Re” $10.00 2” $15.00 AJF-097 | Carronade barrel and carriage 1 AJF-098 | Carronade barrel and carriage 2 aa 1 3%” | $17.00 AJF-095 | Carronade barrel 2 AJF-096 | Carronade barrel 2 ey | AJF-099 | Swivelgun %” _| $5.00 | 7% | 4 | %” [$650 | $7.00 Chain Plate ltem # 110-113 (2 a =, @ ) = A J Fisher Qty | Length | Price 6 AJF-111 | Chain plate 4 AJF-112 | Chain plate brass] 6 AJF-113 | Chain plate brass} Item # q Description AJF-110 | Chain plate Description 3/16”_ 11%” AJF-601 | Chainplate with strop 4 | 15/6” AJF-602 | Chainplate w/strop & deadeye 4 11%’ AJF-603 | Chainplate w/strop & deadeye | $5.99 1%” | $6.99 Qty | Length | Dia. 4 $4.95 1%” | $5.80 6 AJF-600 | Chainplate with strop SEES ” Price 3/16″ $4.99 | 932 $4.99 3/16” $5.25 4 |{ 15/16″ | %32″ $5.25 1-978-462-4555 & Model Fittings Chain Plate (Continued) ltem # Description Qty | Length | Dia. AJF-604 | Chainplate w/strop & deadeye rod 5mm 10 | 1%” AJF-605 | Chainplate w/strop & deadeye rod 7mm 10 | 15/6” AJF-606 | Chainplate w/strop & deadeye chain 5mm | 10 | 1%” AJF-607 | Chainplate w/strop & deadeye chain 7mm | 10 | 1 5/16” Price 3146″ $11.99 | 952” $11.99 3146″ $12.99 | 9%32″ $12.99 Chocks Item # Description Qty | Length | Price AJF-116 | Chock, open 2 S16″ | $2.30 AJF-117_ | Chock, open 2 Yo” $2.90 AJF-118 | Chock, open 2 3%” $3.25 AJF-120 | Chock, closed 2 516° | $2.30 AJF-121 | Chock, closed 2 1146 | $3.00 AJF-122 | Chock, closed 2 916 | $2.90 Cleats ] 4X ltem # q A J Fisher Description Qty | Length | Price AJF-125 | Cleat with base 4 v2” $3.60 AJF-126 | Cleat with base 4 316 | $2.80 AJF-127 | Cleat with base 4 916 | $3.80 AJF-128 | Cleat with base 4 ie $4.25 Sie | $5.75 | AJF-134 | Cleat with post | 6 | Davits ltem # Description AJF-136 | Davit-horizontal Qty | Length | Price 2 1%” | $1.60 AJF-137 | Davit with brass socket | 2 1%” =| $2.95 AJF-138 | Davit 1%” | $3.25 Se 2 1-978-462-4555 & – Model Fittings : – Deadeyes – Walnut ltem # Description Qty |_ Dia. AJF-460 | Walnut deadeye 2.5mm Price 20 3/32” | $3.99 AJF-461 | Walnut deadeye 3.5mm 20 94″ | $3.99 MS2308 | Walnut deadeye 4mm 40 5/32” | $4.99 AJF-462 | Walnut deadeye 5mm 20 316 | $3.99 AJF-463 | Walnut deadeye 7mm 20 9730″ | $3.99 MS-0342 | Walnut deadeye 9mm 40 ¥%” | $4.99 MS-2309 | Walnut deadeye 12mm 40 “ne | $4.99 MS-2310 | Walnut deadeye 15mm 40 | 1%30″ | $4.99 MS-2311 | Walnut deadeye 18mm 40 | 45/4″ | $4.99 40 3/30” | $4.99 Deadeyes – Boxwood MS0390X | Boxwood deadeye 2.5mm AJF-480 | Boxwood deadeye 3.5mm 20 yy” $3.99 MS2312 | Boxwood deadeye 4mm 40 5/32” | $4.99 AJF-481 | Boxwood deadeye 5mm 20 316″ | $3.99 AJF-482 | Boxwood deadeye 7mm 20 9/32″ | $3.99 MS0342X | Boxwood deadeye 9mm 40 yg” $4.99 Dolphin Striker ltem # Description Qty | Length | Price AJF-165 | Dolphin Striker 1 Ki $4.25 AJF-166 | Dolphin Striker AJF-167 | Dolphin Striker 1 %” $3.75 1 1%” AJF-168 | Dolphin Striker $4.50 1 1 %” $4.25 Eagle Item # Description Qty | AJF-170 | Eagle-flying (full) LE fs” A J Fisher | AJF-171 | Eagle-transomstyle a 17 & 1 | 1 | Length Height ya” 116″ $4.95 S16 | $2.30 1% | 1-978-462-4555 | Price & Model Fittings Engine Room Telegraph Item # Description Qty | Inside Dia. | Price AJF-180 | Engine Room Telegraph 1 9/16” $1.75 AJF-181 | Engine Room Telegraph 1 Whe $1.85 AJF-182 | Engine Room Telegraph 1 1Sh6 $1.95 Eyeband ltem # Description Qty | Inside Dia. | Price AJF-176 | 4 eye mast, yard, boom, gaff 1 3/16” $1.45 Eyelets/Airports ltem # Description Qty | Inside Dia. | Price AJF-186 | Eyelet-round brass-GS-23 12 116″ $1.50 AJF-187 | Eyelet-round brass-GS-33 12 3/39″ $1.50 AJF-188 | Eyelet-round brass-GS-44 12 Va” $1.50 AJF-189 | Eyelet-round brass-GS-53 12 5/39″ $1.60 AJF-190 | Eyelet-round brass-GS-63 12 3/16″ $1.60 AJF-191 | Eyelet-round brass-GS-73 12 7 130° $1.60 AJF-192 | Eyelet-round brass-GS-83 12 V4” $1.70 | AJF-193 | Eyelet-oval brass | 4 | 5/16” X 7/16” | $1.95 Flag Poles ltem # Description 2%” AJF-197 | Flag pole 4” Item # Description A J Fisher ee y | $1.95 $2.50 Qty | Inside Dia. | Price AJF-199 | Flag Pole Deck Plate q Qty | Length | Price AJF-196 | Flag pole 1 1-978-462-4555 1146” $1.95 Model Fittings Gudgeon and Pintle ltem # Description Qty | Length | Width | Price AJF-501 | Gudgeon and Pintle brass 2 716″ Ye” | $4.99 AJF-502 | Gudgeon and Pintle brass AJF-503 | Gudgeon and Pintle metal — black 2 Ye” 316 | $6.99 2 7116″ yy” | $7.99 AJF-504 | Gudgeon and Pintle metal — black 2 Yo” 316 | $7.99 Galley Stacks ltem # Description Qty | Height | Price AJF-201 | Charlie Noble style 1 V2” AJF-202 | Charlie Noble style 1 154g’ $1.00 | $1.25 tem # Description Qty | Height | Dia. Price AJF-205 Galley funnel 1 YW” Vi $1.00 AJF-205-1 | Galley funnel 1 5” 3/39″ $1.00 AJF-206 Galley funnel 1 1%” | 36 $1.65 AJF-207 Galley funnel 1 1 34” 3/16″ $1.85 AJF-208 Galley funnel 1 1 34” YQ” $1.65 Item # Description Qty | Height | Price AJF-209 | Galley stack-T style 1 13446 Galley stack-Dbl. 1 13%” | $3.25 AJF-210-1 | Galley stack-Dbl. 1 9116″ AJF-210 | $1.25 $1.75 Grating ltem # Description Qty | Length | Thick | Price MS-0332 | Grating Cherry unassembled 8 11%” ‘ig2″__| $4.99 MS-0333 | Grating Cherry unassembled 8 11%” 364” | $4.99 MS-0334 | Grating Cherry unassembled 8 11 34” ‘ner | $4.99 MS-0335 | Grating Cherry unassembled 8 11%” 332” | $4.99 si JSSe eee eee eee teoeeseseeeeseer 7 EEE tae qupasa suiniiae Jecceeaee JSR eee JSS eeee eeeeee meee ane Item # Description MS-0337 | Grating Cherry assembled MS-0363 | Grating Cherry assembled Qty | Length | Width | Price 1 1 2%” | 2%” | $4.99 1%” | 1%” | $4.99 A-l= tHE: BEELER Jeet ISSR 4 eeeeee Ree esr eee A J Fisher i 19 hy) 1-978-462-4555 & Model Fittings Gunport Frame Item # Description Qty | Length | Width | Price AJF-216 | Gunport Frame with lid 4 yy” yy” $8.00 AJF-217 | Gunport Frame with lid 4 V2” V2” $8.25 AJF-218 | Gunport Frame with lid 4 5,” 5,” $8.50 Hawse Pipe Lips Item # iO =4th Oe ee em ee ee Description Qty | Long Dia. | Price AJF-211 | Hawse pipe lips- Pair 2 3/16” $1.55 AJF-212 | Hawse pipe lips- Pair 2 vA” #1.60 AJF-213 | Hawse pipe lips- Pair 2 °/16” $1.65 AJF-214 | Hawse pipe lips- Pair 2 716″ $1.95 Jackstay Eyebolts Item # Description Qty | Length Dia Price MS0429 | Jackstay —brass 60 Ya” 1/32” $4.99 MS0428 | Jackstay —brass 60 Ye” ‘ne | $4.99 MS0427 | Jackstay —brass 60 1” 3/32” $4.99 Ladders Item # Description Qty | Length | Width | Price AJF-222 | S-curved ladder 2 3%” 7132” | $5.00 AJF-223 | S-curved ladder 2 34” 516” | $5.90 AJF-228 | Curved ladder AJF-229 | Curved ladder 2 2 9/16″ 34” ye” 3%” $5.50 $5.90 AJF-230 | Straight ladder 2 2” “A” $6.95 AJF-231 | Straight ladder 2 %” 7116” $5.50 219, 219-1 4 TTTITITTILILLL. 230 A J Fisher Ladders – Wooden 290-221 Item # Description AJF-219 Wooden ladder 2 2” 316 | $3.25 | Wooden ladder 2 2” S16” | $3.45 AJF-220 Wooden ladder 1 2%” ¥” _| $3.00 AJF-221 Wooden ladder 1 3 4” 34” | AJF-219-1 ey Qty | Length | Width | Price 1-978-462-4555 $3.15 & Model Fittings Lantern ltem # 440 | Description Qty | Length | Price AJF-440 | Lantern, stern 1 AJF-441 | Lantern, stern 1 3A” $2.75 1%” | $3.25 441 Lifeboats ltem # ati Description Qty | Length | Width | Depth | Price AJF-233 | Life boat-square end 1 1%” 9716″ Sie” | $4.50 AJF-234 | Life boat-square end 1 AJF-235 | Life boat-square end 1 1%” %” Sie” | 113/46” | 9ne Sn AJF-236 | Life boat-square end 1 2 V2” 13/46″ | $4.65 Mm” | $4.95 AJF-237 | Life boat-square end 1 2 %” 3” AJF-238 | Life boat-square end 1 3” 3” 4” $4.90 AJF-239 | Life boat-square end 1 2%” 73” yy” $5.30 AJF-240 | Life boat-square end 1 2 3/16” %” v4” | $4.80 | $4.55 56” | $5.50 AJF-243 | Life boat-double rnd end (2 pieces) | 1 1 13/16″ | the 516” $3.55 AJF-244 | Life boat-double sharp end 2” 4” $3.95 1 | AJF-249 | Fishing dory-stacking (3 pieces) | AJF-250 | Fishing dory | 1 | | 1 %” 2%” | 2%” | Se | Ie | | Sno | $6.75 | Se | $4.75 | Life Raft Item # Description Qty | Length | Width | Price AJF-261 | Life Raft 1 1” YQ” $2.35 Life Ring 7A) CN We) Item # Description Qty | Length | Width | Price AJF-262 | Life Ring – square 2 AJF-263 | Life Ring – square 7116″ 716 | $2.95 2 | one | Ine | $3.25 ltem # Description Qty Dia. Price AJF-264 Life Ring-round 2 yy” $2.25 AJF-264-1 | Life Ring-round 2 yy” $2.50 ary 1-978-462-4555 Model Fittings – Mast Belaying Pin Ring ltem # Description Qty | Inside Dia | Price AJF-255 | Mast belaying pin ring (7 holes) | 1 v4” $2.95 Mast Cap ltem # Tis 140-143 e@) 144-145 Width Dia Price AJF-140 | Mast Cap Description Qty | Length 2 5/16″ 5/32” 16° $1.60 AJF-141 | Mast Cap 2 yy” 316° YQ” $1.75 AJF-142 | Mast Cap 2 Yo” 9/30” 5/30″ $1.95 AJF-143 2 9716″ 51416″ 3/16″ $2.15 AJF-144 | Mast Cap rounded} 2 7116″ YA” 3/16” & 4%” | $2.15 AJF-145 | Mast Cap rounded} 2 1146″ yg” Va” & Va” | Mast Cap $2.50 Mast Coat ltem # Description Qty | In-Dia. | Price AJF-251 | Mast coat 2 YA” AJF-252 | Mast coat 2 3/16″ $1.75 $1.95 AJF-253 | Mast coat 2 516″ | $2.25 Oars = Item # Description Qty | Length | Price AJF-256 | Oars (pair) 2 | 17/16” | $1.75 Oar Locks ltem # Description Qty | Length | Price AJF-260 | Oar Locks 4 3” $3.50 Qty Dia. Price AJF-266 | 3 blade propeller LT 1 V2” $2.35 AJF-267 | 3 blade propeller RT 1 3A” $2.45 AJF-268 | 3 blade propeller RT 1 AJF-269 | 3 blade propeller LT 1 Propellers ltem # A J Fisher Description 1%” | $3.80 %3” $3.00 AJF-270 4 blade propeller RT 1 Se | $3.45 AJF-271 4 blade propeller RT | 1 | 1 3/16” | $3.65 AJF-272 4 blade propeller RT 1 1%” | $3.95 AJF-273 4 blade propeller RT 1 1 1/16” | $3.60 AJF-274 4 blade propeller RT 1 716 AJF-274-1 | 4 blade propeller RT 1 1%” | $4.20 wey 1-978-462-4555 | $2.40 S&S Model Fittings Pumps ltem # E> AJF-275 | Deck pump Description Qty Dia. Price AJF-276 | Deck pump (2 pieces) 2 516″ | $3.40 AJF-277 | Deck pump 2 yy” $3.90 316 | $3.20 2 | 3ne | $2.95 280 | AJF-280 | Deck pump (old style) | 2 | | AJF-281 | Deck pump, db! w/handle |_ 1 | 1%” | $7.95 | Pump Wheel Item # (2) Description Qty | Dia. Description Qty | Height | Price AJF-283 | Pump Wheel 2 9/16” | Price $2.75 Radar Screen Item # AJF-289 | Radar Screen 1 36 | $2.25 Radio Direction Finder Item # Description Qty | Height | Price AJF-290 | Radio Direction Finder 1 V2” $1.75 Rudder Socket se Sn SS ee Whistle St eam ] Item # on . = 2 Description Qty | Height | Price AJF-373 | Whistle w/post, w/o handle | 1 AJF-374 | Whistle-steam dbl. 1 AJF-375 | Whistle w/post w/handle 1 AJF-376 | Horn, steam 1 2%” | $1.75 Wits $1.75 2%” | $1.95 %” | $1.60 Winch Heads ltem # Description AJF-377 Winch heads Qty | Length 2 Ye” 316° | $1.75 Dia Price AJF-378 _ | Winch heads 2 3/16″ 316″ | $1.90 AJF-379 $2.00 Winch heads w/post 2 Ya” v4” AJF-379-1 | Winch heads w-hole 2 Ya” V4” $2.00 AJF-380 2 5/16″ ¥%” | $3.00 Winch heads Winch Steam ltem # Description Qty | Length AJF-381 | Winch steam (2 pieces) 1 AJF-382 | Winch steam (2 pieces) AJF-383 | Winch steam (19 pieces) AJF-384 | Winch Steam freighter style (2 pieces) | Ya” 1 %R” TWh 6″ 1 1%” 5,” 1 1 9/46” 1%” AJF-381 AJF-383 A J Fisher Dia %” AJF-384 1-978-462-4555 Price $5.95 $7.95 $20.00 $6.75 & Model Fittings Windlass ltem # Description Qty | Length | Barrel Dia. | Price AJF-385 | Windlass barrel Schooner Style AJF-386 1 2” Ya” $4.95 Windlass with deck supports 1 1 4” 5/16″ $3.15 AJF-386-1 | Windlass with deck supports 1 2 \%” 716″ $4.95 AJF-387 | Windlass barrel, Niagara 1 1/16” vA” $2.40 AJF-388 | Windlass barrel 1 1 3/46” 516″ $2.75 AJF-389 | Windlass barrel 1 | 1 15/16” 76’ $3.35 AJF-390 | Windlass barrel 1 | 23/16” 3” $3.75 AJF-391 | Windlass barrel 1 2 3/16” 5/16” $3.25 AJF-392 | Windlass barrel 1 1%” 5/16″ $2.85 AJF-393 | Windlass barrel 1 1%” v4” $2.40 AJF-394 | Windlass barrel, whaler 1 2%” V2” $4.95 Yard Truss i Item # ae Description Qty | Length | Price AJF-396 | Yard Truss 1 | [$1.75 AJF-397 | Yard Truss 1 Wie’ AJF-398 | Yard Truss 1 1” | $1.85 $1.95 Whaling Tools Item # ———- a (Y Description Qty | Length | Price AJF-420 | Axe 1 Whe $1.25 AJF-421 | Spade Iron 1 %” $1.25 AJF-422 | Boat Hook 1 Y” $1.25 AJF-423 | Lance 1 3 %” $1.25 AJF-424 | Harpoon Iron 1 1%” $1.25 AJF-425 | Hook, cargo AJF-426 | Hook, blubber 1 1 716″ Y.” $1.10 $1.10 AJF-427 | Tryworks tubs w/supports | 2 | 9%” x %” x 7/16” | $7.95 AJF-428 | Tool set (420-424) 4 A J Fisher eX 5 1-978-462-4555 $5.95 & Model Fittings Miniature Figures tem # \ aan LP Description 1 3/4” | $2.89 AJF-A22-1 | Sailor 22mm 1 3/4” | $2.89 AJF-A22-2 | Sailor 22mm 1 3/4” | $2.89 AJF-A22-3 | Sailor 22mm 1 3/4” | $2.89 AJF-A22-4 | Sailor 22mm 1 3/4” | $2.89 ix x SSI, Pahi aw AJF- AJF- AJF- AJF- AJF- A22-0 A22-1 A22-2 A22-3 A22-4 ltem # pie AJFA25-1 AJFA25-2 AJFA25-3 Description Qty | Height | Price AJF-A25-1 | Sailor 25mm 1 1” $2.99 AJF-A25-2 | Sailor 25mm 1 1” $2.99 AJF-A25-3 | Sailor 25mm 1 1” $2.99 AJF-A25-4 | Sailor 25mm 1 1” $2.99 AJF-A25-5 | Sailor 25mm 1 1” $2.99 AJF-A25-6 | Sailor 25mm 1 1” $2.99 32 j RK on AJFA25-4 Item # 4 x is Es : Qty | Height | Price AJF-A22-0 | Sailor 22mm (204 OB } Tap AJFA25-5 Description AJFA25-6 Qty | Height | Price AJF-A35-1 | Sailor 35mm 1 1 3/8” | $3.10 AJF-A35-2 | Sailor 35mm 1 1 3/8” | $3.10 AJF-A35-3 | Sailor 35mm 1 1 3/8” | $3.10 AJF-A35-4 | Sailor 35mm 1 1 3/8” | $3.10 AJF-A35-5 | Sailor 35mm 1 1 3/8” | $3.10 AJF-A35-6 | Sailor 35mm 1 1 3/8” | $3.10 AJF- AJF- AJF- AJF- AJF- AJF- A35-1 A35-2 A35-3 A35-4 A35-5 A35-6 A J Fisher & Model Supplies – Brass Angles ltem # Description Qty | Width | Length | Price K-15001 | Brass angle 1 1132” 12” | $2.25 K-15003 | Brass angle 1 116″ 12” | $3.00 K-15005 | Brass angle 1 \” 12” | $4.25 Brass Flats ltem # Description Qty | Thick | Width | Length | Price K-15019 | Brass flat 2 1164″ 1/39″ 12” $1.35 K-15020 | Brass flat 2 “ig” ‘He K-15021 | Brass flat 2 “16a” 330 12” 12” | $1.35 | $1.45 12” | $1.35 K-15022 | Brass flat 1 ga” i K-15023 | Brass flat 1 ig” 3/16″ 12” | $1.35 K-15024 | Brass flat 2 1730″ ‘He K-15025 | Brass flat 1 1130″ 332” 12” 12” |. $1.50 | $1.45 K-15026 | Brass flat 1 igo” ” 12” | $1.45 Brass Rods (Solid) ltem # Description K-159 Brass rod Qty Dia. 5 0.020 Length | Price K-160 Brass rod 1/64” 5 0.032 12” $1.65 K-161 Brass rod 3/64” 4 | 0.047 12” | $1.85 K-162 Brass rod 1/16” 3 | 0.063 12” | $1.75 K-169 Brass rod 3 0.072 12” $2.40 K-163 Brass rod 3/32” 1 0.094 12” | $1.20 K-167 Brass rod 2 0.114 12” $2.95 K-164 Brass rod 4” 1 0.125 12” | $1.60 K-165 Brass rod 5/32” 1 0.156 12” $2.25 K-166 Brass rod 3/16” 1 0.188 12” $2.65 12” $1.65 Brass Strips q A J Fisher ltem # Description K-230 Brass strips 1 0.016 YA” 12” | $1.05 K-231 Brass strips 1 0.016 Yo” 12”. | $1.15 K-235 Brass strips 1 0.025 “4” 12”, | $1.15 K-236 Brass strips 1 0.025 V2” 12” $1.45 K-240 Brass strips 1 0.032 Ya” 12” $1.20 K-241 Brass strips 1 0.032 Yo” 12” | $1.60 K-245 Brass strips 1 0.064 YA” 12” | $1.65 K-246 Brass strips 1 0.064 Va” 12” $3.10 eX Qty | Thick | Width | Length | Price 1-978-462-4555 & Model Supplies – Brass Tube Qty Dia KS-125 tem # | Brass tube Description 3 1H6° Length | Price 12” | $2.65 KS-126 Brass tube 3 3/30″ 12” $2.85 KS-127 Brass tube 1 Vy” 12” $1.45 KS-128 | Brass tube 1 5/30″ 12” | $1.65 KS-129 | Brass tube 1 3/16″ 12” | $1.85 KS-130 Brass tube 1 7130″ 12” $2.15 KS-131 Brass tube 1 ” 12” $2.35 KS-133 | Brass tube 1 5/16″ 12” | $2.85 KS-135 Brass tube 1 yy” 12” $3.25 KS-137 | Brass tube 1 716″ 12” | $3.35 KS-139 Brass tube 1 V2” 12” $3.65 KS-141 Brass tube 1 9116″ 12” | $4.05 KS-143 Brass tube 1 3” 12” $4.65 Chain ltem # Description Length Price GC-30 Brass chain Qty | L/inch | Length 1 30 12” $3.75 36” $10.95 GC-22 Brass chain 1 22 12” $3.75 36” $10.95 GC-17 Brass chain 1 17 12” $3.75 36” $10.95 GC-16 Brass chain 1 16 12” $3.75 | 36” $10.95 GC-14 Brass chain 1 14 12” $4.25 | 36” $12.50 ltem # Description GCB-30 Black Brass chain 1 30 12” $5.25 36” $15.50 GCB-22 Black Brass chain 1 22 12” $5.25 36” $15.50 GCB-20 Black Brass chain 1 20 12” $5.25 36” $15.50 GCB-18 Black Brass chain 1 18 12” $5.25 36” $15.50 GCB-17 Black Brass chain 1 17 12” $5.25 36” $15.50 GCB-16 GCB-16-OV Black Brass chain Black Brass chain 1 1 16 16 12” 12” $5.50 $5.50 36” 36” $16.25 $16.25 GCB-14 Black Brass chain 1 14 12” $5.50 36” $16.25 GCB-11 Black Brass chain 1 11 12” $5.50 36” $16.25 (“Ti tcher J Fisher Qty | L/inch | Length Price ae ay Price | Length arenas 1-978-462-4555 Price & Model Supplies Blades Item # 20002 20011 Description Qty Price E-20002 | Straight Blade (K-2) (knife #2, #5 & #6) 5 $2.90 E-20004 | 5 Assorted Blades (K-2) (knife #2, #5 & #6) 5 $3.25 E-20010 | Curved Edge Blade (knife #1) 5 $3.55 E-20011 5 $2.45 E-20013 | Fine Saw Blade (knife #1) Double Honed Straight Blade (knife #1) 5 $4.25 E-20014 | 5 Assorted Blades ) (knife #1) 5 $2.75 E-20016 | Stencil Edge Blade (knife K1) 5 $2.45 E-20017 | Small Chisel Blade) (knife #1) 5 $2.45 E-20018 | Large Chisel Blade (K-2) ) (knife #2, #5 & #6) 5 $2.95 E-20019 | Angled Blade (K-2) ) (knife #2, #5 & #6) 5 $3.90 E-20022 | Curved Edge Blade (K-2) (knife #2, #5 & #6) 5 $3.70 E-20370 | 5 Assorted Gauges (knife #7) 5 $7.85 E-20108 | 5 Assorted Carving Blades (knife #7) 5 E-22611 Double Honed Straight Blade (knife K1) E-24017A]| Narrow Chisel Blade 20018 20022 | 100 5 $7.85 $34.50 $4.95 20016 ) 20010 20017 20019 20013 22611 24017A Brushes Item # Description AB-155 Golden Taklon round 4 brush set $5.99 AB-55 Taklon round and flat 3 brush set $4.99 AB-60-4 Sable round & flat 4 brush set $5.25 AB-58 Red Sable round 3 brush set #1, 3, &5 AB-1025 | Camel hair round & flat 5 brash set AB-800-F | Golden Taklon flat 5 brush set Price $5.35 $5.25 $14.99 AB-800-F A J Fisher & Model Supplies – 56009 i | . o . eo “rh -—- Carving Sets J ltem # ltem # Description Price E-56009 | Deluxe Wood Carving Set 6 Chisels $33.95 E-56010 | Palm Style Woodcarving Set 6 Chisels $33.95 Description Price MW-1126 | Easy Cutter for cutting wood strips up to %2” thick | $32.00 1123 MW-1128 | Super Easy Cutter, small size cuts up to 4” thick | $27.00 Pa MW-1123 | Hobby and Craft Square 4” me $6.75 MW-1124 | Scale Lumber Guage/Ruler 12” 1126, 1128 $8.25 Dowels – Birch Qty Dia. AJF-7903 | Dowel ltem # Description 4 1146″ Length | Price 12” $2.95 AJF-7904 | Dowel 4 yy” 12” $3.10 AJF-7905 | Dowel 4 316” 12” $3.25 AJF-7906_ | Dowel 4 YA” 12” $4.15 AJF-7907 | Dowel 4 5116″ 12” $4.50 AJF-7908 | Dowel 3 ye” 12” $3.50 Py — pir IfMp Dowels – Walnut Ming, . DiyMitiny Lj! GU “Yh Item # AJF-7920 Description Dowel Qty 2 Dia. 16” Length | Price 12” $3.00 AJF-7921 Dowel 2 1/3” 12” $3.00 AJF-7922 Dowel 2 9/32” 12” $3.50 AJF-7923 Dowel 2 3/16” 12” $3.90 AJF-7924 Dowel 2 vA” 12” $4.00 AJF-7925 Dowel 2 5/16” 12” $6.00 AJF-7926 Dowel 2 5%” 12” $6.50 Dowels – Basswood Dia. ter Round ‘ — A J Fisher | Qty | Round |Half Round | Quarter Round | Length 3/64” 1 $3.35 $1.55 $1.40 24” the. 1 $1.70 $1.55 $1.40 24” °/64” 1 $1.70 $1.55 $1.35 24” 3/30” 1 $1.70 $1.55 $1.35 24” 1/3” 1 $1.70 $1.75 $1.55 24” 5/30” 1 $2.10 $1.90 – 24” 3/16” 1 $2.10 $1.90 – 24” YA” 1 $2.25 $2.05 – 24” i* 34 Ky 1-978-462-4555 & Model Supplies Drills a Item # 55511 se Qty | Price E-55520 | 6 Assorted Drills as” — Description E-55511 | 20 Piece Drill Set #61 to 80, Flat Metal Case E-55521 | 12 Assorted Drills Ee | $18.50 1 $8.45 1 | $15.75 55522 | £-55522 | 20 Piece Drill Set #61 to 80 Plastic Case e 55520 1 1 | $25.25 e@ 55521 Replacement Drills Size Qty Price #50-57 2 per pack #58-65 2 per pack $2.25 $2.45 #66-73 2 per pack $2.60 #74-80 2 per pack $2.75 Files E-55607 | 12 Assorted Shape File Set 5.75” $27.75 E-55608 | 12 Mini Assorted Shape File Set 4” $16.50 E-55667 | 6 Assorted Shape File Set $14.65 E-55668 | 6 Assorted Shape File Set With Handle $17.75 55608 55607 55667 55668 Glue SLO-ZAP — ZAP-A-GAP_ KIGKER ZAP KICKER ZAP CA Description Qty | Price Glue-Zap Slo-Zap 1o0z | $8.75 ZAP-02 Glue-Zap Zap-A-Gap 10z | $8.50 ZAP-01 Glue-Zap Zap-A-Gap 20z | $14.95 ZAP-08 Glue-Zap-CA 10z | ZAP-07 Glue-Zap-CA 20z | $14.95 ZAP-15 Zap Kicker 20z| $7.25 ZAP-16 Debonder Z-7 1oz| $5.25 ZAP-33 Ze E Z-7 DEBONDER A J Fisher Item # ZAP-20 i 35 AJ Glue-Zap Slo-Zap 1-978-462-4555 2 0z | $15.75 $8.50 & Model Supplies Knives Item # Description Price E-15001 | Aluminum #1 Knife with safety cap pins w/ #11 blades $5.45 E-19001 | Aluminum #1 Knife with safety cap pins w/5 assorted blades $6.15 E-16018 | Soft grip handle #1 knife, assorted colors $5.95 E-16002 | Aluminum #2 knife with safety cap $4.50 E-19002 | Aluminum #2 knife with safety cap w/5 assorted blades $7.40 E-16005 | Heavy Duty #5 knife with safety cap $5.45 E-19005 | Heavy Duty #5 knife with safety cap w/5 assorted blades $8.75 E-16006 | Aluminum #6 knife with safety cap $9.15 E-16007 | Carving Knife #7 with scabbard $9.25 — 15001 & 19001 . 16005 19005 Knife Sets E-19062 | Basic Knife Set 1 $12.75 1 $13.50 1 $69.00 1 $17.35 1 $19.75 1 $37.75 K2 medium duty knife, K1 light duty knife, 10 assorted blades and safety cap E-19063 | Light Duty Knife Set K1 knife w/5 assorted blades, K3 pen knife w/5 #20011 blades, & safety caps (Leeewwer sway | oo oo E-44200 | Super Deluxe Knife Set } K1, K2, K5, K18, K30, K40 knives, Hobby Awl, burnisher, 44200 sharpening stone & 37 assorted blades. Vinal case E-90001 | Self Healing Cutting Mat w/ #1 knife & #11 blades, 8%2″x12” E-60003 | Self Healing Cutting Mat 12°x18” E-60004 | Self Healing Cutting Mat 90001 60003 60004 A J Fisher 18°x24” ee % 1-978-462-4555 & Model Supplies 4 -_ a qth +e .qg Modeling Assistance y i vel \ | | EXL-55675 | Extra Hands with Magnifier | $22.95 | EXL-70022 | Delux Magna-Visor (black) $23.50 1.8x, 2.3x, 3.7x, & 4.8x possible magnifications Pins Item # Description Qty | Length | Price AJF-BP-38 | Brass pins 200 Sig” $2.95 AJF-BP-12 | Brass pins 200 Vg” $2.95 AJF-SP-12 | Steel pins 200 1p” $2.95 Pin Vise CSS 70023 7 ES ————— i on ‘ Description Qty | Price E-70023 Double End Pin Vise Holder 3.5” 1 $9.35 E-70003 Mini Pin Vise w/12 assorted drills 1 | $21.65 E-55661 Swivel Head Pin Vise 1 $9.25 tem # Description E-30604 Needle Point Awl E-70005 _| Delux Pin Vise w/6 assorted drills _ h~<—_, aia eS tem # 1_| $18.75 70003 70005 ——O—=Eeeeeeeee weet 55661 A J Fisher i 37 aK Qty | Price 1-978-462-4555 1 $4.95 Model Supplies a tT—s-<1= <* — ~+—“2 ~s os Planking Tools ME-MS105 ZNA-37-320 | Spoke Shave 3 %” width IN a ZNA-37-323 | Spoke Shave replacement blades 2 pack Item # $5.95 MS-7205 Electric Plank Bender $28.00 AM-7384 Nail Nailer $15.95 Description ; $8.25 Price Fair-a-Frame Building slip: for plank on ME-MS105 | pulkhead hull assembly $39.99 ME-MX25_ | Hull Planking Vise: Adjusts to an angle $39.99 AM-7378 Item # Description Price AM-7378 | Water Line Marker, adjustable clamp & pencil line | $20.00 AM-7382 | Keel Klamper, adjustable angles for planking $85.00 MSMX105 | Water Line Marker $9.99 7) AM-7382 Pliers ae ~ 55550 a ok 5556] = ( 55560 A J Fisher Item # Description Qty | Price E-55550 Wire Cutter 4.5” 1 $10.75 E-55561 Long Needle Nose 6” 1 $10.75 E-55580 Needle Nose W/side Cutter 5.5” 1 $10.75 E-55560 Needle Nose 5.5” 1 $10.75 E-55590 Bent Nose 5.2” 1 $10.75 E-55592 Round Nose 5.2” 1 $10.75 _f. 55590 HX al, 5592 Nl 1-978-462-4555 Model Supplies Pliers ltem # 90035 Description Qty | Price XUR-90035 | Precision Micro-Shear-Flush Cut 1 $14.95 XUR-90039 | Sprue Cutter 1 $15.25 XUR-90065 | Tweezernose Plier-Smooth Jaw 1 $20.75 XUR-90076 | Longnose Plier-Serated Jaw 1 $16.95 90039 90065 90076 Putty ltem # Description Price 20200C White Putty 2.3 oz. tube $5.25 Soldering Iron A J Fisher ltem # Description Price E-90004 30W Electric Soldering Iron w/ Hot Knife and Tip $16.39 i 39 AJ 1-978-462-4555 Model Supplies — : -*— -= z=. a ots. ge Rigging Line Black ltem # Description Qty Dia. Price AJF-291 | Black glazed cotton line-#10-5 12 yds | 0.028 | $5.00 AJF-292 | Black glazed cotton line-#10-4 12 yds | 0.022 | $5.00 AJF-293 | Black glazed cotton line-#12-4 12 yds | 0.019 | $5.00 AJF-294 | Black glazed cotton line-#16-4 12 yds | 0.017 | $5.00 AJF-295 | Black glazed cotton line-#24-4 12 yds | 0.013 | $5.00 AJF-296 | Black glazed cotton line-#30-4 12 yds | 0.011 | $5.00 Rigging Line Tan ltem # Description Qty Dia. Price AJF-301 | Tan glazed cotton line-#10-5 12 yds | 0.025 | $5.00 AJF-303 | Tan glazed cotton line-#12-4 12 yds | 0.019 | $5.00 AJF-304 | Tan glazed cotton line-#16-4 12 yds | 0.017 | $5.00 AJF-305 | Tan glazed cotton line-#24-4 12 yds | 0.013 | $5.00 AJF-306 | Tan glazed cotton line-#30-4 12 yds | 0.011 | $5.00 NEQ-C62 NEQ-C62 | Beeswax and holder —_—k Rigging Supplies $2.95 NEQ-C64 | Needle Threaders 3 $1.75 NEQ-C64 Sail Cloth | AJF-SC-1 | Cotton Sail Cloth 29”x 24” | 1 | $8.95 | Saws Item # Description Price E-55666 | Mitre Box Set w/#5Handle and Saw Blade (fine) $23.95 E-55670 | Razor Saw Set w/#5Handle and Saw Blade (med.) | $15.95 E-55666 > a 2 ) eG E-55670 en ‘ A J Fisher 1-978-462-4555 & Model Supplies a a a ee ee Scissors | NEQ-PS_ | Perfect Scissors 4” with guard | $31.00 | NEQ- —_ ee 2 3/64] 1/16] 5/64] 3/32] 1/8 | 5/32] 3/16] 1/4] 5/16] 3/8 1/2 3/4 2 3 4 0.76 | 0.95 3/64 0.56 | 0.56 0.60 | 0.68 0.83 | 1.03 1.68 | 1.56 2.36 | 4.11 0.56 0.65 | 0.71 0.89 | 1.16 1.68 | 1.77 2.46 | 4.28 | 4.92 | 6.99 0.68 | 0.79 0.99 | 1.23 1/16 >5 3/32 ad 3/16 1.45 1 0.63 | 0.68 = oO s i 1/32] 1/32 | 0.55 | 0.56 | 0.56 2.30 | 3.85 | 4.59 | 6.52 | 4.70 | 6.68 1.21 | 1.36 2.25 1.92 2.72 | 4.70 | 5.34 | 7.58 1.32 | 1.63 2.76 3.67 | 5.47 | 6.99 | 9.95 1/4 1.76 2.96 5.12 | 6.76 | 8.51 | 12.07 1/2 0.00 4.36 7.68 | 12.39 | 17.06 | 24.21 1/8 0.96 3.23 | 4.92 | 5.99 | 8.50 Scribed Sheets-Basswood 24” Long X 3 1/2” wide i a te, Thickness — 1/; 6” Scribe Spacing 1/30” 1/; 6° 3/30” Price/Sheet 1/,” $4.50 Ship Decking-Basswood 22” Long X 3” wide X 3/e4” thick Deck Spacing | Price/sheet ‘ A J Fisher i* 44 Ky 1/16” $15.95 3/30” $13.75 1/3” $13.75 3/16” $13.75 1-978-462-4555 Model.Ship Plans SHIP PLANS —- POWERED VESSELS Champion Champion River Tug River Tug Scale 1/4°=1’ 1/8°=1′ L.O.A. 36” 18” Sheets 2 2 Price $30.00 $30.00 CSS Alabama Confederate Raider 3/32”=1’ 29” 3 $32.00 Edna G. 1896 Great Lakes Tug 1/8°=1’ 13” 1 $30.00 Eugene Thomas/ Great Lakes Ore Vessel 1N6’=1 33” 1 $40.00 Strathcona Excalibur Ocean Cargo Steamer 1/8”=1’ Henry Ford |1611’ Great Lakes Cargo Vessel 1/16”=1’ 33” 3 $50.00 37 1/2” 1 Huron Brave 1890 Lumber Hooker $75.00 1/8″=1’ 22” 3 Huron Brave $35.00 1890 Lumber Hooker /4″=1? 43 1/2” 3 $45.00 John Ericsson Cargo Vessel/whale TAG’=1? 25 1/4” 3 $55.00 Joseph Medill Fire Tug — Chicago /4″=1? 30” 2 $50.00 “Trawler” Steam Trawler 1/8″=1’ 13” 1 $30.00 “Trawler” Steam Trawler-(hull lines) 1/4”=1 26 1/2” 1 $40.00 includes %” plan USS Preston 4 Stack Destroyer 1/8″=1’ 31” 3 $30.00 USS Texas Battleship 1/8°=1’ 36” 2 $30.00 “JOHN ERICSSON” Great Lakes Whaleback “CHAMPION” Great Lakes Tug of 1868 A J Fisher : 1-978-462-4555 Model. Ship -Plans =. a aa ex -* oe —_ ——e —- = POWERED VESSELS “HURON BRAVE” STEAM TRAWLER ‘““EUGENE P. THOMAS” Great Lakes Ore Steamer ”EDNA G.” Great Lakes Tug “HENRY FORD II” Great Lakes Freighter OCEAN CARGO STEAMER (Tramp) All rights reserved. Reproduction of plans in whole or part without written permission of A. J. Fisher is prohibited. é A J Fisher i 46 AS 1-978-462-4555 Model. Ship .Plans – = – . -re oe “th. .g SHIPS PLANS — SAILING VESSELS All plans show hull lines. Scale L.O.A. Sheets 33” 43 1/4” 3 3 $42.00 $80.00 2 Masted Schooner 1852 1/4”=1’ 2 Masted Schooner 1852 = 1/8”=1’ Frigate 1797 1/8°=1’ Frigate 1797 1/8°=1’ 31 1/2” 16 1/2” 36” 38 1/2” 2 2 5 5 $35.00 $35.00 $50.00 $60.00 Bluenose California Fishing Schooner 4 Masted Barque 1882 Challenge Challenge Constellation Constitution 3NB’=1’ 1/8°=1’ Price Dancing Feather Pilot Schooner 1953 3NB’=1’ 20 1/2” 3 $37.00 Dilligence Armed Cutter 3/16″=1’ 24 1/2” 2 $35.00 Flying Cloud Clipper Ship 1851 1/8°=1’ 36 1/2” 4 $65.00 Gertrude L. Thebaud — Fishing Schooner 3/16″=1’ 30” 3 $45.00 Great Republic 4 Masted Clipper Ship 3/32”=1′ 41 1/2” 3 $35.00 John R. Manta Whaling Schooner 1904 = 3/16”=1’ 29 1/2” 2 $45.00 John McKeon Pilot Schooner1838 1/8°=1’ 12 1/2” 3 $30.00 John McKeon Pilot Schooner 1838 VUP=1? 29” 2 $35.00 Lark Baltimore Clipper 1812 1/8°=1’ 20” 4 $40.00 Lightning Clipper Ship 1/8°=1’ 39 1/2” 3 $45.00 Lucia A. Simpson 3 Masted Schooner 1875 3/16’=1’ 36” 3 $55.00 Malek Adhel Merchant Brig 1840 Vea? 31” 3 $55.00 Miss Lou Biloxi Schooner 1919 VUP=1? 26” 3 $40.00 Niagara 2 Masted Naval Brig 1812 1/8’=1’ 20” 4 $55.00 Sovereign of the Seas Clipper Ship 1852 1/8°=1’ 39” 7 $70.00 St. Paul Clipper Ship 1/8″=1? 37 1/2” 4 $95.00 Stag Hound Clipper Ship 1/8°=1’ 36” 3 $42.00 Wanderer Whaling Bark 1878 1/6″=1’ 27 1/2” 4 $60.00 Young America Clipper Ship 1/8°=1’ 40” 3 $45.00 All 3 Masted Clippers Belaying Pin Plan 1800 1/8°=1’ 1 $25.00 Baltimore Clipper “Lark” A Rakish Privateer of 1812 “FLYING CLOUD” Donald McKay’s Most Famous Clipper Ship Year 185] All rights reserved. Reproduction of plans in whole or part without written permission of A. J. Fisher is prohibited. A J Fisher i 47 aK 1-978-462-4555 es — a, 4a. —= =aor “~~ ~ a es —- yt Model. Ship ‘Plans SAILING VESSELS SS ms “WANDERER” ae —sta ms’ es IN | is “ie . oa aA IS. —— Whaling Bark = oe uilt Built 1878 — i “Constitution” “LUCIA A. SIMPSON” Typical Lake Schooner “Sovereign of the Seas” Clipper Ship of 1852 “BLUENOSE” Nova Scotia Fishing Schooner (Wrec on coast of ked Maiti early im 1946) All rights reserved. Reproduction of plans in whole or part without written permission of A. J. Fisher is prohibited. é A J Fisher i 48 Aj 1-978-462-4555 recked Wrecked 1924 & Model.Ship -Plans 7: — – – . « . @ “_ ° ~ YACHT MODEL PLANS Successful Models in their respective Classes (all plans show both lift and planked method of building, except where noted) R/C PLANKED MODEL YACHTS AVENGER by R. Irwin, 36/600 R/C Yacht draft 16”, beam 10 5/8”, disp. 8 lbs… BANDIT 2.0.0.0. 0000000000. ee $30.00 by R. Irwin, 50/800 R/C Yacht draft 16”, beam 10 5/8”, disp. 12 lbs., LW.L. 50”… 2.000.000.0000… $30.00 ZEPHYR by R. Irwin, One Metre R/C Yacht draft 14 3/4”, beam 9 1/2”, disp. 8 lbs., LO.A. 39 3/8…………… $30.00 DEREK’S 10 byR. Irwin, 10 Rater, draft 15”, beam 10 1/2”, disp. 20 1/2 lbs. L.O.A. 70”. …………… $30.00 24” DETROIT SCHOOL, Braine Steering, Lift Method L.O.A. 24’, Beam 6-1/2”, Draft 5 3/4” eee eee $30.00 30” DETROIT SCHOOL, Braine Steering, Lift Method L.O.A. 30”, Beam 7 1/4”, Draft 6 3/4” eee eee $30.00 36” CLASS CHICO Il, by A. J. Fisher — lift method, L.O.A. 36”, L.W.L. 30.75”, beam 8”, draft 7.5,disp.9.75 lbs., lead 6 lbs., sail area 570 sq. in. Lines and sail plan, lift method only……………………00.. $30.00 MARBLEHEAD CLASS PLANS BOSTONIA VII 81.62”, ClassA model yacht, ex. beam 14.37”, L.W.L.52”, disp. 57 lbs., lead 43 lbs, draft 12”, sail area 1700 square inches, fullsize… 2… ee $30.00 CATSPAW Ill, L.W.L. 47.25”, beam 10”, draft 8.45”, disp. 19.5 lbs., Lines and sail plan 50/800…………………… $30.00 CHERRIO I, designed by J. Black, L.W.L. 44.5”, beam Ex. 9”, draft 8.5”, disp. 13.5 lbs.,lead 10.5 Ibs., Lines and sail plan………. $30.00 CHEERIO Il, designed by J. Black, L.W.L. 46”, beam Ex. 9.5”, draft 8.5, disp. 16.5 lbs., lead 13 lbs. Lines and sail plan. . 50/800 class……. $30.00 CHERRIO Ill, designed by J. Black, beam 9.5”, disp. 18 lbs L.W.L. 46.25” Lines and sail plan… 50/800 class…………………….004.. $30.00 KILTIE, 65.5”, 6 metre model yacht, beam 10.62”, draft 9.06”, disp. 26.42 lbs., sail area 1115 square inches, fullsize………….. $30.00 DART, 18”, V-bottom sailing model, sloop rig fullsize………………. $25.00 MALOLO, 50/800, full size, 50.25”, beam 9.5”, draft 8.6”, disp. 14.75 lbs., lead 10.5|lbs………00.0 00.000… eee $30.00 STARLETT, 36”, V-bottom sailing model, sloop rig fullsize…………… $30.00 SUNKISS, designed by G. Lassel; L.O.A. 50.25”, beam 9.75”, draft 11.30”, disp. 18.75 lbs. Lines, sail plan, and sliding gear, lift method only (includes sliding gear plan)…………………. $40.00 SLIDING GEAR (Sunkiss) can be adapted for other pond models………. $25.00 All rights reserved. Reproduction of plans in whole or part without written permission of A. J. Fisher is prohibited. ‘ A J Fisher * 49 AJ 1-978-462-4555 Model.Ship Plans Se SS —— SESS =_=.. Sh ee eT a YACHT MODELS “Dereks 10” “Zephyr” – One Meter Bandit 50/800 All rights reserved. Reproduction of plans in whole or part without written permission of A. J. Fisher is prohibited. A J Fisher i= 50 Aj 1-978-462-4555 Model. Ship -Plans ~ – -L- , Sa ee == = — = ~ 4 eS ee nee — – – YACHT MODEL PLANS PLANS SUITABLE FOR RADIO CONTROL CHAMPION Great Lakes Tug scale 1/4’=1’ L.O.A. 36” Beam 55/8’…………….. $30.00“ 4381/2? Beam 81/4 ………….. 30” Beam 7” 2… .. cee HURON BRAVE Lumber Hooker 1890 scale 1/4’=1’ LO.A. $45.00 JOSEPH MEDILL Fire Tug scale 1/4°=1’ L.O.A. ee ee ne $50.00 OTHER DETAILED PLANS No 30 Naval Gun Carriage — detailed plan 3/4” scale for 18 and 24 pdr. gun and carriage. From Navy restoration plans prepared for Frigate “Constellation”… No. 10 0.2.0.0… 000s $20.00 Nautical Table Lamp — using lower section of the main mast of U.S.S. “Constellation” for the base of lamp. mahogany, walnut or maple may be used. Afiferail set with belaying pins, and a ship’s bell hung on the mast, completes this unusual and artistic lamp. Full sized detailed plan…… No15 00.0.0… 0.00. ee $20.00 Nautical Table Lamp — Using the base of the lamp as a capstan of the U.S.S. “Constellation.” mahogany, walnut or maple may be used Full sized detailed plans ………….00 0.022 No 20 eee $20.00 Venetion Gondola — Full sized plans for building this artistic and colorful model. Scale 1/2” to the foot, making a model 20” long. The original model was made of walnut. Full sized plans…………………..00.005- $25.00 CHICO II, by A. J. FISHER All rights reserved. Reproduction of plans in whole or part without written permission of A. J. Fisher is prohibited. A J Fisher a Se 1-978-462-4555 978-462-7012 FAX: 978-462-2589 www.pielcraftsmen.com We offer a collection of 14 handmade wooden ship models. Each model is a completely finished miniature of a famous ship READY TO DISPLAY. Our models are carved from select well-seasoned basswood, carefully constructed and finished in detail with skill and patience. Three of our models are of ships originally built in Newburyport including the first U.S. Revenue Cutter MASSACHUSETTS, built in 1791. Our models make great gifts for all events at home and the office. For the model maker: If you are a beginner or experienced modeler we carry over 150 wooden ship model kits for all skill levels. We have a great selection of modeling “How To” and “Reference” books. There is a great selection of tools, wood stock, (both basswood and mahogany) and model fittings. Nautical Gifts: We carry a wide selection of nautical ship prints, shipin-bottles, genuine and reproduction scrimshaw. We also have nautical note cards, framed and unframed photographs, a great collection of half hull models and many antique maritime instruments and artifacts. Hours: Wednesday-Friday ‘ 9AM — 4PM Saturday 10AM — 4PM Sunday thru Tuesday Closed A J Fisher * 52 Ky 1-978-462-4555 Ordering Information Important 1. Payment by check, money order, Mastercard or Visa. 2. All orders outside the US must be in US dollars payable through a US bank. 3. Returns for exchange or refund must be made within 30 days. 4. All shipments to Massachusetts must include 6.25% sales tax. 5. We reserve the right to change prices without notice. How to order: 1. Call us at: 978-462-4555 to place your order. 2. Fill out the order form enclosed in this catalog or print the order form from the A.J. Fisher website, www ajfisher.com. Fill it out completely printing clearly. 3. Mail the order form and payment to A. J. Fisher, 3 4% Center Street, Newburyport, MA 01950 or fax your order to: 978-462-2589. Shipping information and charges: We ship our products by USPS or UPS. Shipping charges include packing and insurance. Shipping outside the continental United States will be priced individually based on the destination point and order size. Fittings and Supplies minimum $6.00 (bubble envelope) $25.00 to $100.00 $9.00 (box) $12.00 (box) over $100.00 Model Plans 1 to 3 sheets $9.00 4 to 5 sheets $10.00 6 or more sheets $11.00 Model plans are shipped in a tube within the US. Model plans are shipped folded outside the US. Model Kits & Hulls ‘ Up to $99.00 = $18.00 $100 to $149.00 = $25.00 $150 to $200.00 = $35.00 Over $200.00 = $42.00 A J Fisher (* 53 AJ 1-978-462-4555 Index é A J Fisher i 54 a) 1-978-462-4555 Index é A J Fisher i= 55 AS 1-978-462-4555 Notes ‘ A J Fisher i 56 Aj 1-978-462-4555