Radio Control Modeler: March 1972

  • Title. Author. Summary
R/C SAIL ACTIVITY By – Rod Carr The photo on page 11 is of an extremely impressive vessel built by Dwight brooks of 1799 Correa Way, Los Angeles, California, Quoting from the description provided by Dwight, ‘” The purpose of the project was to create something large and realistic in total appearance and a boat that could withstand rough water, provide ample space for ultimate scale and radio installation. The effort took some 1,500 hours and one year to complete, The interior is complete, including couches, tables, a kitchen, two staterooms, working button lights throughout ( including spreader bar lights), a forward ” head “‘ and all nautical fittings. The upper cabin area lifts off to provide easy access to radio gear located amidships. A Kraft radio was used with four servos providing main and jib control ( through a winch system ), rudder control and forward-neutral- reverse on a six volt Pittmen motor. I used a 2″ prop which provided excellent speed and directional control while under auxiliary power. The hull was made of 3/8 inch balsa strips, fiberglassed and coated with five coats of resin. Four coats of colored urethane were Sprayed on the hull as a final finish. The decks were made of 1/4″ wide mahogany strips glued to 1/8 ” ply – wood and filled with Duratite, then sanded to cre ate realism. Fittings on the ship vary from Norco to German to self-made, The masts are Spruce and the rigging is all braided wire with turnbuckl e adjustments, All windows and Portholes are 1/8 ” plastic epoxied into place, The sail area totals 2,000 square inches and are made of a light weight plasti c material,” DIMENSIONS Length Beam Depth Draft Mast height ,main Mast height, m’zn 78″ Sail Area ,total 14” Power 22°” “Ballast 17” 90” 60″ Displacement Sails Rigging 2,000″ 6v Pittman #6 lead shot 90 lbs. Plastic 1/16″ braided Dwight is currently looking for someone to do the job of moldong hulls to the design of SIRIUS. They would certainly find a ready market among R/C Skippers who are contemplating taking up distance racing on open water, Anybody who might fancy owning one of these beautiful hulls should let Dwight know, as I’m sure that it would influence his decision to go ahead with limited production, 4 Se