Sail Making Articles
We have several articles related to sails and sailmaking.
- The firstĀ is a short discussion of theory: The Design of Model Yacht Sails by A.M.Ballantyne.
- We then move on to the most complete set of instructions on how to sew a set of sails from cotton: “Sails” by Walter K. Moss from The Modelmaker, 1940.
- The next article discusses the one thing that is possible on a freesailing boat and difficult in R/C: spinnaker: The Spinnaker.
- Finally there is a treatise on proportions of sails for the Marblehead class of boats: Sail Plans: Dimensioned and Balanced for the Marblehead Class Racing Yacht.
These articles represent the state of the art of 50 years ago or more. The modern expert on model sails, and a good source if you want to have a suit made, is Rod Carr.
Rod Carr’s Observations
After reading these pages, Rod offered the following observations on the difference between the freesailing designs of the 40s and the R/C sails of today:
Modern panel joint tapers produce a vertical camber distribution that is the opposite of what the 1940 texts say. I do believe that it was likely that the flat headed vintage sails were the result of two requirements:
a) As the cloth was asked to carry more load near the head, it would deform more, hence cutting hollow in the luff would remove some of that unwanted camber.
b)The camber was defined as unwanted, because camber high in the sail can result in excessive heel, and as the boat heeled in a puff, it seems logical that the vane skipper would opt for the sail to be flatter up there to release the wind and reduce the heel. We all know that balance changes as a function of heel angle, and without a rudder to counteract things in real time like we R/C types, an automatic means of controlling heeling episodes with a flat section in the top of the sail seems sensible.
The concern with heeling is reinforced by the fact that freesailing models, because they had to be able to sail anywhere in a pond, have substantially less draft than modern R/C boats, which can be steered to the deeper parts.
Cotton Sailcloth
We have not found any cotton sailcloth completely suitable for sailing on the water. The instructions contained here are, however, suitable for constructing an accurate set of reproduction sails for display of a vintage or antique boat. The closest material we have located is called “long staple down cambric.” This is a tightly woven cotton material used in down pillows, quilts, and comforters.
If you need a set of display sails made, the best approach is to locate a quilter. Quilting clubs can be found by going to your local fabric supply store such as JoAnne or Hobby Lobby. They generally have bulletin boards giving club contact information.