R E L E D O M T s BO Se Ry = & 1-3 yboew A~s $3.50 sat = “ reat Planes STINGER es rT)All BT ale i —— Rate Prop | Sull Servs s e i v (SLMS 2 5 Spring 1990 THIS ANNUAL EVENT BRINGS THE — BEAUTY OF THE TALL SHIPS—IN MINIATURE—BACK TO NEWPORT! | and the Newport Mayor’s Cup Regatta. Hosted by the Narragansett Model Yachting Association AMYA* Club no. 51, with Rich Palmer as coordinator, this is one of the East Coast’s major annual model boat events. Ed Holt’s EC 12 No. 564 crossing the finish line to win the final best ef Sori an a by LOUIS F ANDREKO 42 RADIO CONTROL BOAT MODELER S WE DROVE to Newport, I looked forward to seeing some of the best East Coast 12 model boats and the most exciting races ever. My jun- ior crew (son Louis) and I were heading for Fort Adams Park in Newport’s Brenton Cove for the September 9 and 10 Mini Americas Cup* U.S. Match Race Trials We reached Newport early on Friday morning, and as we crossed the Newport Bridge, I enjoyed the breathtaking view of the tFoode DAY 1 The weekend weather forecast promised sunshine, light winds and temperatures in the 80s, and I was sunburned even before the races began! On Saturday morning, all the skippers were givena fleet racing card showing in which race they were to run, and they were told they’d better be ready when they were called to the starting line. The race course and protest procedures were discussed, and it was announced that the 720 rule would be in effect. This rule says that if any boat fouls another’s right of way, it must US. TRIALS & NEWPORT MAYOR’S CUP REGATTA The skippers (left to right) standing: Ed Holt, Tom Qualtieri, Bud Pletcher, Bob Craig, Glenn Chalder, Chris Jensen, Lou Andreko, Dave Bosworth. Kneeling: Jack Gregory, Ken Qualtieri, Al Spring, Jack Sullivan, George eAcdhalgh, Charlie Silvia, and Art Jacobsen. Newport Bay area and thought, “Here we are; the home of the real Americas Cup.” Although racing wouldn’t start until Saturday, several members of the Narragansett club were already setting > up the marker buoys and the testing tank. All the East Coast 12 model yachts had to be tested in fresh water to ensure their compliance with AMYA rules that specify that the water line must be between 42 and 43 inches. My EC 12’s water line was 421/2inches, which is ideal. On hand to keep things moving were host-club President Ed Holt, Race Director Manny Costa (a previous Mini Americas Cup winner), Jerry Trahan and Mike Andrea. do a 720 (two 360-degree turn- abouts), and this would obviously re- duce boat speed (a way to encourage good sportsmanship). Sailing an EC 12 isn’t easy, since it has a shallow keel, and the changing tides and currents added to the challenge. My first race was called, | put my boat—Nasty Winch II no. 1055—into the water and was ready for the 1-minute countdown. I had a great position for the start of the race, but miscalculated the start and crossed the line 1 second too soon. Like my MINI AMERICAS CUP U.S. TRIALS 1st: Ed Holt 2nd: Jack Gregory MAC Wooden Paddle Award: David Bosworth NEWPORT MAYOR’S CUP REGATTA 1st: Chris Jensen 2nd: Jack Gregory 3rd: George Greenhalgh sunburn, that hurt! Having to re-start cost me the race. The races were organized so that, as one group of boats rounded the windward mark, the next set started out. The day’s events moved along quickly, and occasional fleet racing brought a welcome change | of pace from the fast-run heat races. SPRING 1990 43 Any disasters?—nothing too serious: some torn sails, broken sheet lines, stripped winch gears and a few boats that sailed away by themselves and had to be retrieved. By the end of the day, more than 75 percent of the match (including much of the fleet racing) had been completed. DAY 2 Sunday morning was initially calm—unusually calm for Newport, where a stiff sea breeze usually blows in off the ocean. In fact, it was so calm that even the EC 12s’ 1,250 square inches of sail were barely enough to move the boats along, and their skippers hoped for something better. Fortunately, the wind slowly increased during the morning, and the modelers took to the wa- Greenhalgh, Ed _ Holt, Jack Sullivan, Chris Jensen and Glenn Chalder each had nine wins. Art Jacobsen and Jack Gregory had 10 wins, so they battled it out in a match-race series to determine who would ad- vance to the final round (a best four-out-of-seven race). The victory went to Jack Gregory. After competing in a series of matches and fleet races, Ed Holt ad- vanced to race against 2nd-place Art Jacobsen, defeated Art, and then raced against Jack Gregory in the final best fourout-of-seven match races. In the final race, Ed took the first three heats and Jack Gregory won the next three. Now there was only one race left to determine the overall winner. After resolving a protest by Jack in the final heat, the committee awarded Ist place to Ed Holt and 2nd place to Jack Gregory. Chris Hensen won the Newport Mayor’s Cup for Fleet Racing and, since he had won several times before, his name was already on the cup! The award for the “All Around Try Harder Skipper” (MAC wooden paddle) was presented to Dave Bosworth. (I had the dubious honor of winning the wooden: paddle in ’87.) Among the spectators at the final match was Newport Mayor, Robert J. McKenna, who was there to hand out the racing awards and the commemorative medallions, which we all received in honor of the Newport’s 350th birthday. In the open water off ter. Only skippers who had nine or more wins were eligible for the final round of racing. George The 1989 Mini Americas Cup Trials winners (left to right): runner-up Jack Gregory; Mayor Robert J. cKenna; and winner Ed Holt. 44 R/C YACHTS Ixpertence the thrill of 12 meter yacht racing with Victor Cup Series yachts. [ach are1 meter semi scale models of the most famous of the international 12 meter racing yachts designed specially for R/C sport or competition sailing. Complete kits (less ballast) | STARS € STRIPES | , length 392 in sail area 598 sq in $94. i; : Le AUSTRALIA II 39 in length sailarea 598sqin $94.0 suitable forAMYA Olympic 1 Meter competition Additional kits; SOLING IM length 393in. $82. length 36 in. $70. MINI SOLING length 30 in. length 232in. SNIPE $40. TAHOE II = $50. each kit add $4 shipp ing VICTOR Model Products 12258!/2 WoodruffAve. a stamped addressed send Downey, CA 90241 (213) 803-1897 business envelope. For complete details Fort Adams Park on Americas Cup weekend were Echells 22-foot sailing ships, which were competing in their own championship regatta. One of their skippers approached me after a match race (which I had just won) to admire my small “toy” boat. After talking to me, I think he now knows bet- Top photo: Brothers Ken and Tom Qualtieri, rigging up for Sunday’s racing. Above: Chris Jensen and his EC 12 no. 42. ter! And how did I do in the 1989 Mini Americas Cup Race? Let’s just say I got sunburned! *Here are the addresses of the organizations mentioned in this article: Mini Americas Cup Association, Richard H. Palmer (Coordinator), C/C R&R Promotions International, P.O. Box 391, Pine Brook, NJ 07058. AMYA (American Model Yachting Association), Patricia Hein (Membership Secretary), 1884 Campus Court, Rochester, MI a 48309. Learn more about the exciting world of R/C cars in all scales: or gas! oad, electric on-or off-r For asample copy of the leading R/C car magazine, send $1 ($2.95 value), postage included, to: Radio Control Car Action Specal Offer Air Age Mail-Order Services 251 Danbury Road Wilton, CT 06897 Be Oy Ae oo he Pe) aR e PHOTOS BY DON BILSKY Victor Model Products by DON BILSKY T’S BEEN A FEW years since I reviewed a sailboat. When you regularly run gas boats, you forget that there can be fun and excitement without all that noise! I thought I wouldn’t enjoy my first sailboat—a Dumas Bingo—but | was wrong. A good-looking, well- constructed sailboat is fun, a chal- lenge to operate, and welcome on any public pond because it’s so quiet. The Stars & Stripes, from Victor Model Products*, is no exception. The Kit The Stars & Stripes is a semi-scale model of the famous 12-meter yacht that brought the Americas Cup home in 1987. With its 39.2-inch length, 8-inch beam and 600 square inches of sail, this is a beautiful boat that sails smartly. It will definitely draw the spectators and provide you with hours of challenging enjoyment. Before we get into construc- tion, let me tell you what doesn’t come in the kit. First, you’ll need Easy to build and fun to sail, this slick design won’t even mind a land-locked on your mantle. 46 RADIO CONTROL BOAT MODELER 7 or 8 pounds of lead shot. I bought mine at a gun shop, and _ the ‘smallest bag weighed 25 vite EI Ce So my workbench is messy! Glue the deck to the hull with Superglue or epoxy. To ensure a good bond, be sure you have enough masking tape to hold the edges every inch or so. Make sure that your sailcontrol unit is in and functioning properly before you do this! : Wr ‘ pounds. (I guess I’ll have to do another sail project to use the rest!) You’ll also need your favorite brand of CA, epoxy or poly- inches square inches Hull Material: An inexpensive Futaba” will work well for control, and you can choose the sail-control unit. Futaba makes a good one, alit isn’t quite Vacu-formed, high-impact plastic Radio Channels Req’d.: 2 (sail control and rud- strong enough to hold the sails in a really stiff wind. Airtronics* has a unit, and Victor even sells a limited-production one, but I chose the Dumas* motor-driven Probar Sail Control Unit (no. 3701), which has a swinging arm to control the jib and mainsail simultaneously, but not independently. I had used one in the Bingo, so I knew it was super-powerful. The Dumas SCU is powered by a 4.8V battery, which can be either the receiver battery (which der) This is why I say that the sail-control unit must be installed and checked before the deck is installed: there isn’t much room to get at it! I don’t recommend) or a separate pack. Both rechargeable Ni-Cds and dry cells work well. Current flow, and the resulting control, is by a double-pole, double-throw, center-off switch. By bend- Sug. Retail Price: $94 Features: Easy to build; the nylon ing the arms on the mi- parts are pre- croswitches that ride on the cam, you can adjust the trimmed, Sail material is provided, as is all the points at which the microswitches work. required hardware. Builder This unit has a transit time of 5 seconds, weighs 8 ounces, and has—get this|—a torque output of 40 inch/pounds! It takes less must provide lead shot for bal- last (approximately 7 pounds). than an hour to put to- gether, but will make you pull your hair out if you let it! (Maybe I can use that as an excuse for my loss of hair!?) Actually, assembling the Stars & Stripes isn’t difficult, just tedious. Assembly The kit’s instructions and illustrations handle the assembly sequence well, so I’ll just discuss a few points and make some sug- gestions you may find helpful. meter sailboat Lenath: 39.2 Beam: 8 inches Sail Area: 598 ester resin, and silver paint. though SPECIFICATIONS Type: Semi-scale, 1- Adhesives: | used two types of adhesive: CA (both thin and gap- | filling) and Hobby Poxy* 5-min- ute. The CAs work quite well when used with an accelerator, and several coats may be applied to fill gaps and to seal the two hull penetrations against leakage. If you use epoxy, roughen the surface of the plastic first, so that the epoxy will adhere. (A medium The mast can be adjusted by way of a bolt in the bottom of the rigging. Notice that I chose this as the location for the radio antenna. It runs through the eyelets along the rigboom that the ging uses, so it’s ess noticeable. Comments: Like Victor’s Australia II, the Stars & Stripes is quickly assembled and sails easily. The first-time sailor won’t have any problems, and the kit will provide a solid foundation of sailing basics. SPRING 1990 47 Below: I used a Dumas Sail Control because of its ey(paiaki 2 pull. Its torque— rated at 40 inch/poun ‘s—will hold the sails in even the strongest winds. The unit must be assembled and operates from a 4.8V battery. (I used a separate pack.) Above: A sailboat needs weight in the keel to stay upright in a stiff wind. The Stars & Stripes uses 7 pounds of lead shot, which is poured in slowly, with alternate layers of polyester resin. | | | Build a Universal Boat Stand A stand makes it easier to work on any type of R/C boat. Here’s how to make your own: Cut a 6-foot piece of 1×2-inch pine into four 18-inch lengths, and drill a hole through the center of each. Put two of these pieces together, line up the holes, and pass a bolt through to hold them. Don’t tighten the bolt too much, because sandpaper works well for this.) The instructions tell which adhesive you should use for each detail, and all of them should be available at your local hobby shop. Rigging: Knots tied in Dacron line tend to loosen during use, unless you take precautions. After tying a knot, cut the line approximately ‘/s inch beyond it. Ignite the raw end | 48 with a match, and allow the line to burn up to the knot. Melting the Dacron will prevent the knot from loosening. (A drop of Jet does the same thing, but it tends to stiffen the line.) To prevent it from snagging on the stitching, make a small loop in the end of the stainless wire before inserting it into the hem of the sail. (The wire should be approximately !/4 inch longer than the hem.) Then, lay the sail out flat and bend a 180degree loop in each end of the wire. When installing screw eyes and cotter pins in wooden com- RADIO CONTROL BOAT MODELER NYLON WEBBING MATERIAL ponents, use a drop of Jet to hold them in place. Finishing: You can finish the model with most types of spray enamel or acrylic-type synthetic lacquer. (I used Hobby Poxy paint.) The manufacturer suggests the following method: Before applying finish, sand the entire plastic surface with no. 400 wet-or-dry sandpaper to remove any surface gloss. Then, prime the exterior with several coats of acrylic-lacquer primer, sanding between coats. Paint the deck, and after it has cured, paint the hull. To avoid “shadowing,” paint the rudder separately. When I had applied stripes and added decals, I sprayed the whole boat with two coats of clear Hobby Poxy. You can spraypaint the mast and spars to look like aluminum. Rigging Adjustments: There are several ways to adjust the rig- ging, so you can shape and posi- tion the sails for maximum per(Continued on page 65) 1x2x18 PINE (4 REQ’D) fo” DOWELS (4 REQ’D) L the pieces should be able to move—like scissors. Arrange both sets to look like X’s, position them 1 foot or so apart, and join them with dowel rods between the tops and bottoms. Attach two pieces of nylon strapping to the dowels. This should hang down a few inches and form a cradle in which the hull sits. “4 MODEL SJ 11/2 inches aft. Don’t overtighten the mostly to the very good hatch-to-hull fit, but if the boat ever sinks, the ra- | backstay, as this will deform the mast. Adjust the main and jib outhaul dio gear will be soaked. (There’s no to provide approximately a bowsies fact, in box; seal around the radio 1-inch bow at each club. Position the there’s a large opening to allow the main downhaul bowsie so that the speed control wires to exit the box.) mainsail luff is just snug. Adjust the Overall, the Stinger went together so that the main club is free to vang were instructions very easily. The rotate horizontally without hiking clear and had good photographs and upward. Activate your sail control and parts lists. (A list of the necessary parts drive it to its in-haul limit. Connect and hardware appears at the start of both main and jib-sheet slide links, probreal only My each set of steps.) and adjust each bowsie so that the lem was with the installation of the main club is midship and the jib club windshield, but with a little patience— is approximately 10 degrees from and help!—I overcame this. To make midship. that suggest | things easier, though, Great Planes Marine consider includFinishing Touches ing a pre-formed windshield. As an experienced R/C car racer, but first-time boater, I was impressed with the Stinger’s torque and speed. Its handling was very stable and predictable, yet it was very nimble and responsive. The warning on the front of the instruction book was absolutely correct: This is not a toy! *Here are the addresses of the companies mentioned in this article: Great Planes Marine (Div. of Great Planes Model Mfg. Co.), P.O. Box 788, Urbana, IL 61801. Futaba Corp. of America, 4 Studebaker, q Irvine, CA 92718. STARS & STRIPES (Continued from page 48) formance. The main- and jib-outhaul bowsies shape the sails to an airfoil, providing lift or forward motion, and the mainsail downhaul-bowsie controls the tension of the sail luff along the mast. The boom vang prevents the aft end of the main club from hiking and Use an accurate scale to weigh the 7 pounds of shot required to fill the keel. Put in a little at a time and then some polyester resin, alternating until all the shot has been used. Be careful: resin may attack the plastic if mixed to cure overnight. Test-mix a small batch to provide a curing time of 30 minutes After the mast has been rigged and erected, build the upper shrouds. Adjust the mast jack to tighten the lower shrouds slightly. Pass each half of the upper shroud through the spreader hole, and install a crimp sleeve. Route the shroud around the deck screw eye, adjusting the tension until it equals that of the lower ones, and make loops in each. Here are some helpful hints: e Make sure that you have someone to help keep the mast centered on the hull. e Use a pair of pliers to squeeze to- gether the crimp sleeves that hold the wires. If you don’t get the right tension, you can open the crimp sleeve once and still reuse it. center line. I picked a good day to try out my Stars & Stripes; it was sunny, with a 15mph wind. I sent the boat out into a sheltered part of the lake, and it moved through the water with grace Initial Adjustments: Adjust the mast jack to provide minimum shroud tension and engage in the deck mast step. Connect the jib swivel, shrouds and backstay with their respective screw eyes. Adjust the jib jack until the shrouds are just tight. Adjust the jib uphaul and backstay bowsies to rake the masthead approximately For a sample copy of the leading R/C airplane magazine, send $1 ($2.95 value), postage included, to: Model Airplane News Specal Offer Air Age Mail Order Services 251 Danbury Road Wilton, CT 06897 to 1 hour. spilling air, and the backstay bowsie does the same thing for the jib club. The jib uphaul and backstay bowsies adjust the rake of the mast; the mast jack adjusts the tension in the shrouds; and the sheet bowsies adjust the angle of the main and jib sails from the hull Learn more about the exciting world of flying R/C planes, helicopters, jets and sailplanes! Performance and style. When it got out a little farther, the wind took hold, and I had to let the sails out a little. The boat heeled over and took off. I tried some tacks and came about a few times. | even managed a wing-and-wing! Sailing downwind with the sails filled was exhilarating, and the boat MANITOWOC MARITIME MUSEUM’S 14TH ANNUAL CONTEST FOR MODEL SHIPS AND BOATS AUGUST 4 & 5, 1990 Enter as many models as you like, as long as they weren’t entered for this contest in previous years. Deadline for registration: July 15. CATEGORIES— Miniatures—6 inches or less Static Scale Operational Models Dioramas Nautical Crafts JUDGING— Novice Intermediate Advanced For details and entry form, contact Richard Young, Contest Director Manitowoc Maritime Museum 75 Maritime Dr., Manitowoc, WI 54220. (Continued on page 66) SPRING 1990 65 Rea boat manufacturers and ship builders DON’T build their own power and running hardware, they go to companies that DO, shopping for the best Performance, Dependability, Quality, and Price. Why should you, The Modeler, settle for less? Come to M.A.C.K. Products Model Marine, “The Model Motor People,” for your power options. We have complete Power and Running Hardware Packages for: STERLING MODELS, MIDWEST MODELS, LINDBERG MODELS, DUMAS MODELS, STAUBITZ of BUFFALO, D & L SHIP MODELS, and DYNAMIC MODELS. STARS & STRIPES (Continued from page 65) looked terrific. I sailed for about 20 minutes, and, believe it or not, I had as much fun as with some gas boats! The Stars & Stripes looks graceful and ing, the you off! is quiet. When I had finished sail| took it home and put it next to fireplace: that’s the other thing can do with this boat—show it *Here are the addresses of the companies mentioned in this article: Victor Model Products, 12258’/2 Woodruff Ave., Downey, CA 90241. Futaba Industries, 4 Studebaker, Irvine, CA 92718. Airtronics, Inc., 11 Autry, Irvine, CA 92718. Dumas Products Inc., 909-A E 17th St., Tucson, AZ 85719. Hobby Poxy Products, 36 Pine St., Rockaway, NJ 07866. a NAMBA CHAMPS (Continued from page 63) For further information send $2. for complete catalog to: DEALER M.A.C.K. Products Model Marine INQUIRIES INVITED! P.O. Box 464 VISA & MASTERCARD ACCEPTED Long Branch, N.J. 07740 ($50.00 MINIMUM PURCHASE) A SPECIAL MESSAGE \ TO RETAILERS MAGINE the benefits of drawing many more regular customers into your store every month. Imagine adding a popular, profitable—and returnable—hobby product to your store. By stocking « Model Airplane News, Radio Control Car Action and Radio Control Boat — Modeler, you’ll accomplish both! These are the most informative and entertaining modeling magazines available to the R/C consumer—and __ they’re in tremendous demand. These magazines will actually stimulate more __ sales of R/C airplanes, cars, boats and accessories for you. [ If you’re not already stocking Air Age _ magazines, please call us toll-free and we’ll let you know how they can make money _ for you (in C7, 203-834-2900) (dealer inquiries only) Air Age Publishing @ 251 Danbury Road @ Wilton, CT 06897 Outboard classes. Jack Oxley won three of his four heats, but a DNF kept him out of the B Outboard Hydro championship. While Gentleman Jack did take 2nd place overall, the 1st-place trophy went to Mark Hull (Ventura, CA) who finished well in all four of his heats to take the class. Twenty-six 3.5cc modified K&B outboard engines entered the A Outboard Hydro class, and these boats competed in closely fought heats. No one won all his/her heats, but Larry Ingelson won two heats and placed 2nd in his other two heats to take the class. Cathie Galbraith, NAMBA executive secretary, finished a close 2nd just ahead of Richard Hazlewood, who turned the fastest heat times but didn’t finish his first heat. (A DNF will keep even the fastest boat out of the winner’s circle!) The 37 entries in the 7.5cc-powered B Mono class provided the closest final scoring during the week. Vying for 3rd place overall, two boaters earned a perfect score and two others earned nearly perfect scores. Ralph Henry turned in a perfect 1,600 points and finished 2nd behind Vincent Dimatteo Jr., who had a perfect score and the fastest time. Right behind Vincent and Ralph were Justin Hill and Ron Russell with 1,500 points each. Three-point hydro designs competed in the three Friday events: Sport 40 I, Sport 40 II, and Sport 60. (Continued on page 73) 66 RADIO CONTROL BOAT MODELER How to make this widely used unit perform even better. by GEORGE FOX LANG ANY OF US sail with non-proportional sail-control servos, and while these simple switch-controlled devices function reliably, they’re less than elegant. A fully proportional control is a real advantage when racing. Being able to command a desired sail trim by moving a stick to a marked position is much faster than observing the sail and determining when to stop hauling or easing. Also, a glitch in communi- cation is far less devastating because the proportional unit immediately corrects any induced error when it receives the proper command signal again. I originally launched the Allybeth with the Dumas” no. 3702 sail-control unit installation as shown in photo 1. (This installation was detailed in the Fall °89 edition of RCBM.) While this switch-controlled servo functioned well, Pa I found myself longing for proportional sail control after only a few voyages. The Dumas unit held a certain charm, since | already owned it and the alternatives were expensive! It has a lot of torque and, even in a strong breeze, it handles my Huson 36’s sails with ease (nearly 600 square inches). I wasn’t anxious to give this up, so I set about modifying the unit for fully proportional operation. (See photos 2,3, and 4.) At the heart of this modification is a potentiometer that’s teAiad ey ro) = 2 ES g 6 > a Dn £ 2 = Author’s original installation used a disc on a small servo to “flip” a toggle switch controlling the Dumas No. 3702 sail-control unit. Revised installation eliminates the small servo and toggle switch and substitutes electronics. SPRING 1990 67 SAIL SERVO UPGRADE Edge view of proportional installation shows feedback potentiometer added to Dumas servo. Electronics module mounted under board. Underside of board shows epoxy-encapsulated electronics module mounted with foam tape. turned by the servo’s output shaft. This variable resistor provides feedback of the shaft’s angular position (photo 5). The feedback is compared with the desired position commanded by the transmitted signal, and the motor is electronically switched to cause these to agree. The circuit that accomplishes this is shown in figure 1. | built a “breadboard” version (actually several!) to “tune” the circuit to the servo’s electro-mechanical behavior. Photo 6 shows this prototype under test. I constructed the final version (shown in photo 7) on a commercially available prototyping PCB. | then made a small box Sig. Gnd. From Black Receiver | from G-10 fiberglass to Linear taper potentiometer, R1, Ri | Coupled to servo output shaft. .. Command mount trim resistor, R2, on pot. White | | V+ 01 pF 3.9K e 15 [4 R3 =72 | Deadband 9 10 | oO M1 [ID Ui __, Power — | Type | CD4538BE 16 | u2 MN4013B [us| cp4ooibc | 8 7 14 | 7 | Note: apply a .1pF “bypass” capacitor across Figure 1. Proportional Sail Servo Schematic R5 1.0K a1 R7 | BC337-40 180Q 1.0K BC 327-40 BC337-40 2 1N914 1N914 D4 1 | ApF i Dé 1N4001 1N4001 bo C4] Black no_| Green ©) Red [no Red £ i 0 ie S1 no. Servo Motor $2 RI 0 no R10 R9 180Q BC337-40 R12 CONTROL BOAT MODELER THF 1N914 1N914 DRS 6 BC327-40 = C5 05 1.0K R11 06 1.0K RADIO the capacitors do the entire job. Unfortunately, the These characteristics made it impossible for me to produce a stable design for this gear motor with this IC. The NE544N has certain programmable a3 D3 07 MTR BC 337-40 68 upon NE544N servo amplifier. This is a terrific chip, and it’s used in many servos. In most applications, this single integrated circuit (IC), the two transistors Dumas no. 3702 is a real power-sucker: its gear train is relatively inefficient; and the overall gear reduction is very high. the power and ground pins of each IC as listed | | above. Draw power and ground directly from | battery pack, not through receiver pins. Q2 was based and a few resistors and Ground 14 house it and filled the box with epoxy resin to encapsulate the electronics as shown in photo 8. The rejected design in the background of photo 6 characteristics (deadband and minimum pulse width, in particular) that couldn’t be extended adequately to avoid unstable interaction between the motor and the battery power supply—hence, the circuit in figure 1. The operation of this circuit can be understood from the timing diagrams Figure 2: Circuit timing diagrams <= in figure 2. The command second (once every 20 Command [Ll Command 4 | Feedback tion, a short pulse represents the “close-hauled” condition and you request it by pulling the joystick back toward you. Pushing the stick away from you lengthens the pulse and commands the servo to “ease out.” aT Too Loose y = a Correct Deadband Too Tight 4 AE cial J [ LoB y J] 4 Pag 4 Latch See Ge, ’ I] j milliseconds), as shown. The information is con- veyed by the width of the command pulse, and this type of encoding is termed modulation. pulse-width Each valid command pulse is at least 1 millisecond wide and can be as much as 2 milliseconds long. The exact width determines the position to which the servo will rotate. In this applica- Clause Hauled...stick down (back/climb) | v Run Free. ..stick up (forward/dive) Lf — 1to2mS signal shown in 2A is the normal output from a receiver to a servo. The receiver sends one such command, in sequence, to each of the servos in your system. Each servo typically receives a command logic pulse 50 times per 20 mS = [ LFB | Lin [out J | Command Bien Sheet in | ees ms |~« #500 Hold position Transmitter signal lost a | WA ; The circuit develops a feedback pulse that varies in width between 1 and 2 milliseconds in proportion to the angular position of the output shaft. It causes the motor to turn as required to match the length of the feedback pulse to that of the command pulse. These actions are shown in figure 2B, where three command pulse periods are expanded. The rising edge of each command pulse triggers the initiation of a feedback pulse. The duration of the feedback pulse is determined by the servo’s current position. Feedback potentiometer couples to output shaft and turns with sailtrim arm. New cam/coupling mounting plate and threaded stand-offs eS la eg ea| Re L a aie fl | wall [in [ou Sheet out Servo forced to hold state J Sel The falling edge of the feedback pulse initiates another timing pulse called “deadband.” The deadband pulse establishes the tolerance for command and feedback pulse matching, and this prevents “hunting” or buzzing around a match. This pulse is always 20 microseconds wide and is exaggerated in figure 2B for clarity. The logic states of feedback and deadband are latched into “flip-flop” memory elements on the rising edge of “latch,” which corresponds in time to the falling edge of the command pulse. Thus, the stored logic levels, “LDB” Testing the circuit on a breadboard; note several battery packs and scrapped design in background! required. SPRING 1990 69 Designation U1 Q1, Q3, 04, Q6 Q2, Q5 BC 337-40 NPN power transistor BC 327-40 PNP power transistor D1 through D5 1N914 signal diode 1N4001 power diode R1 5 KQ, 2W, linear taper potentiometer with 0.25-inch-diameter shaft R2 3.6 KQ, .25W, 5-percent carbon film resistor 3.9 KQ, .25W, 5-percent carbon film resistor 100 KQ, .25W, 5-percent carbon film R3 Mack R4 Figure 3: Power Transistor Lead Identifications vib resistor R5, R6, R8, R9, R11, R12 1.0 KQ, .25W, 5-percent carbon film R7, R10 resistor a 180 Q, .25W, 5-percent carbon film resistor BC C1 0.2 uF, 25V, 10-percent ceramic capacitor C2 0.01pF, 25V, 10-percent ceramic capacitor ao. s| Hie) ES L ek é : U2 U3 D6, D7 Circuit constructed on common prototype board. Description 4538B CMOS dual mono-stable multivi brator : 4012B CMOS dual D-type flip-flop 4001B CMOS quad NOR gate re < u The BC 327-40 PNP Transistor E: IL iz The BC 337-40 NPN Transistor 1.0 uF, 25V, 10-percent ceramic capacitor C4, C5 and 3 “bypass” caps 0.1 uF, 25V, 10-percent ceramic capacitor Printed-circuit board GC Electronics no. J4-104 “Wiz-It” PCB Miscellaneous 1/32-inch G-10 fiberglass to form pottingshell potting resin (1-2 ounce) mating connector for your receiver Molex connec- + ee for power, motor wire, (Latched Deadband) and “LFB” (Latched Feedback) are updated 50 times a second at the end of each command | motor will do for the 20 milliseconds between command pulses. If LDB is high and LFB is low, then the feedback The latched LDB and LFB levels determine what the amount of 20 microseconds or less, i.e., the duration of pulse. pulse is slightly shorter than the command pulse by an LALLA ROPM,, Circuit encapsulated in epoxy, ready for installation. Connectors mate with receiver, ship’s power and revised sail-control. 70 RADIO CONTROL BOAT MODELER Remove original wiring harness and capacitor on motor, rewire switches and add diodes. SAIL SERVO UPGRADE | the command and feedback pulses match within 20 microseconds. When the durations match, as in the center cycle, no action is necessary and the motor is turned off. If the pulses fail to exhibit a dura- tion match of 20 microseconds or less, the motor is turned on in a direction that decreases the disparity. This is caused by the high-level assertion of either the “In” or “Out” signal, and these are formed from logical combinations of the LDB and LFB latched signals. The left cycle shows a feedback pulse that’s too short, and this indicates that the servo must sheet in. In this instance, both the feedback and deadband pulses occur and extinguish before the end of the command pulse. Hence, both LDB and LFB are low for the ensuing 20 milliseconds, and this generates a high-level “In” signal. Conversely, the feedback pulse can be too Figure 4 .250 Dia. Hole Thru | | HF icy ‘si <— 500 —> ANY 125 Dia. esa @) power-switching transistors that bridge the motor. When “In” is high, it turns on the NPN duct current through the motor (assuming $1 + eeop <— .500 < © a 6s | ob <— is closed, shorting D6). Alternatively, asserting “Out” high turns Q4 (NPN) and Q5 (PNP) on through NPN trigger, Q6. This causes current to pass through the —> 312 Dia. Hole Thru | ya trigger transistor Q1. This, in turn, causes transistors Q2 (PNP) and Q3 (NPN) to con- 600 Mat!: 1/2” Drill Rod while LFB is latched high. This results in the assertion of “Out” to a high level for 20 milliThe “In” and “Out” logic signals control the I—— ee CAM/Coupling (NTS) oa seconds. | po oe eee end of the feedback pulse, the deadband pulse isn’t yet initiated. The LDB is latched low, ny rai | | ia ae long, and this indicates a need to ease the sheet, which is shown in the right-hand cycle. Because the command pulse falls before the 8-32 Tapped Hole Thru 2 Places G) 875 ——»> L425 {34 2.000 i : 125 = ; MATL: 1/16 Aluminum Plate Moning Cia INTG) | TNOTE: Verify these dimensions on your servo. Some variation is possible. motor in the opposite direction (assuming S2 is closed, shorting D7). Note that the logical formulation of the “In” and “Out” signals prevents ever asserting these signals “high” simul- ate taneously, which would result in shorting the power supply through Q2/Q4 and Q3/Q5 with destructive results (Continued on page 74) Above: Feedback potentiometer installed on sail-control. Left: Replace Dumas cam with cam/coupling; make mountin plate for potentiometer; cut pot shaft to length; install on threaded standoffs. 72 RADIO CONTROL BOAT MODELER .15 AERO SPEED OR 90 HYDRO MARINE US-1 1989 IMPBA “F” HYDRO & MONO CMB 45-.67-.85 GRAN PRIX PICCO PICCO FREE FLIGHT STACKED CRANK SHAFT – STEEL ROD W/NEEDLE BEARING EACH SIDE OF ROD THROW – ZIMMERMAN ROTOR VALVE – LOOP PORTED – 3rd CHANNEL FUEL “ABC – LOOPED PORTED ADJUSTMENT. PIPE AVAILABLE FOR SPEED ENGINES LIGHT WEIGHT — LOOP PORTING TIDEWATER ENGR. & MACH. CO. ALL PICCO & CMB ENGINES (MARINE, CAR & AERO .15-90) & PARTS WE SELL TO ALL ¢ DEALER PRICES AVAILABLE THE MOTORS & PARTS PEOPLE 2406 W. Madison * P.O. BOX 1135 * BASTROP, LA 71221 U.S. DISTRIBUTOR Phone 318-281-2460 PACKING & HANDLING $5.00 BOATS —HYDROS— TIDEWATER BOAT HARDWARE [HYDRO & MONO) MACHINED STRUTS TURN FINS (Mono or Hydro} TRIM TABS 3/16″ or 1/4” FLEX-DRIVE SHAFTS VIBERATION ISOLATOR MOTOR MT.-Drilled & Tapped to fit PICCO & CMB ENGINES ROSSIE & PICCO GLOWPLUGS TUNED PIPE BRACKETS COYOTE, MONGOOSE YOUNGBLOOD, SPIDER, AVENGER KITS BROUSSARD, CRAPSHOOTER PICCO-CMB-PRATHER & MAC TUNED PIPES ABC & PRATHER PROPELLER {Balancing & Polishing Service) RACING FUEL & COMPONENTS NITRO, METHANOL, SYN OIL, CASTOR OIL BEARING PULLERS FLYWHEEL PULLER NITRO, OIL & FUEL the arms of these switches are closed to the normally open (no) contacts within the operating arc. When one of these switches is opened by the flat of the cam on the output shaft, mo- tion ceases. The diodes D6 and D7 allow the motor to turn in the opposite direc- tion to move back into the operating arc. While proportional servos don’t really need, and rarely incorporate, such a mechanism, | retained it to be absolutely certain this powerhouse couldn’t run amuck and tear my rig apart! (See RCBM, Winter 1989.) The final item of circuit operation pertains to the loss of signal. As shown in figure 2C, the reset signal addresses this possibility. Reset is asserted “high” within half a second —C.0.0. $2.75 CASH ONLY COMPETITION PRICES SUBJECT TO CHANGE WITHOUT NOTICE MACHINED RUDDERS (with water pick-up) LOOP PORTING – 5 BEARING – STEEL ROD W/NEEDLE BEARING – ZIMMERMAN VALVE – 180° TUNED PIPE STINGER YOUNGBLOOD MONOS MULTI COLOR FINISH (5) SIZES 31″ 34″ 38″ 40″ 45) Many color combinations in stock Solld Color Glass Hydro 45-67-80-90 of losing communication. When as- e Be very careful not to confuse PNP signals to high and low states, respec- interchanging leads; refer to figure 3 serted, it forces the LDB and LFB tively. This causes the servo to hold position with the motor off. The re| ceipt of a command pulse clears the reset, and operation resumes on the next command. There are no unusual considera- tions in the construction of this circuit. I chose to pot mine because I’m a nut about water and electrons being socially incompatible—you may not consider this necessary. You’ll have to choose a set of connectors that’s compatible with your equipment. Here are some suggestions: e Build the logic section (U1, U2, U3), and verify its operation before adding and NPN transistors. Watch out for for transistor pin-out. e Don’t connect the collectors of Q2/ Q4 or Q3/Q5 until you’ve verified independent transistor function. Use an LED from collector to ground to test Q2 and Q3, and an LED from collector to V+ to test Q4 and Q5. e If you intend to pot the circuit, mount R2 on the potentiometer. This component can be changed to vary the servo’s proportional swing within the limit switches. Don’t “firm-up” the wiring to the servo motor or potentiometer until you’ve veritied function as discussed. e Don’t pot anything until you’ve the power transistors. (Continued on page 80) Electrifying News from OCTURA MODELS, INC. Boats! Power Model R/C for Propellers e Performanc Pioneer Producer of Proven, Precision, 540 For electric powered boats, using direct-drive with motor 05 ain { X430 .125 diameter propeller shafts, OCTURA now has available 10 metal propellers. These are intended for use on 540 and 05 motors as well as the special wind motors. motor hot wind hand rotation unless otherwise noted. hi torque Available in Silicon Brass, Beryllium Copper, Add $1.50 total for shipping. lll. residents add 7% sales tax. X432 Aer 5 fa ] The R/C Model Boat Propelier People! CTURA . ates ean aa ath OC4D Drive Dog……….. 1.75 each Oe Re ee ae Order direct only if not available from your local hobby shop. X430RH 1630 Cobalt { 40 { 4930 Install an OCTURA propeller on your direct-drive boat you’ll be emdzed at the performance difference. ca Also available is a drive dog, the OC4D. All are left THE R/C MODEL BOAT PROPELLER PEOPLE …SINCE 1954! nie X427 OCTURA ee mons wanes ‘SUPPLIES OCTURA MODELS, INC. 7351 N. Hamlin Avenue ° Skokie, IL 60076 SPRING 1990 75 Now get to places you’ve never been to before! ROBART RIGHT ANGLE DRIVES Model No. 420 BB for all DREMEL* MOTO-TOOLS except New DREMEL 395 Series. Model No. 421 for New DREMEL 395 Series MOTO-TOOL Precision built with rugged ABS housing, hardened PM gears, and life time lubricated bearings. Perfect for use with ROBART’S Rough ‘N’ Tough® Carbide Cutters. Model No. 420 BB Simply attaches to your present Moto-Tool with just the tightening of two screws. Uses the same collet system you now have. Available at your local hobby shop. Srobart P PO. Box 1247, St. Charles, IL 60174 SAIL SERVO UPGRADE St., Tucson, AZ 85719. Dumas Products Ltd., 909-AM East 17th (Continued from page 75) verified everything! That’s it for now. I’ll present the mechanical modifications in the next issue. *Here’s the address of the company mentioned in this article: a APBA CHAMPS (Continued from page 30) hind Duckering’s Spider. As the class finished, the wind began to lessen and the water gradually became calmer. Relief! e Sport 40 II Class. Conditions were kinder for this class. The rules for this event allow any legal 7.5cc engine, and the event soon became a race between two OPS 45-powered Steve Muck-designed fiberglass Shockwave FIRECRA RADIO CONTROL HIGH PERFORMANCE. =. * ( OUT-BOARD STYLE) INBOARD. «+. RACING BOAT KI Bo ae All LENGTH 11” BEAM EASY TO ASSEMBLE Next Day Runner Includes: decals, hardware, antenna, speed switch and ace surface-drive motor unit. List price: $229.95. Intro special: $189.95. DICKERY DOCK INC., FREEPORT, NY. 11520 For Visa, Mastercharge, or Amex: Call Dave’s Hobby Biot at (516) 623-2750, Weekdays, 1pm to 6pm. Dealers Write: Dickery Dock Boat Works, 400 Atlantic Ave., Freeport, NY 11520 Watch your tail! The Rooster Hawk is coming! 80 RADIO CONTROL BOAT MODELER





