Winter 1989 Build an ICE SAILER! How To Dial-in _ Your Engine of ABCs Tuned-Pipe Use Nit 46040 AMERICA’S NEW FUN-TI by KARL LaLONDE RE YOU SITTING around waiting for the ice to thaw on the pond? Have you completed the building project you’d planned for these cold months? To avoid winter depression, let’s make good use of our free time both indoors and out. Winters don’t stop my model boating pleasures. My youth was spent way up in northern New York, right on the St. Lawrence River, where winters were harsh, but nothing kept us indoors; there was skating, sledding and ice fishing. Because most of the work force were connected with the boating industry, winter months meant time to overhaul boats and build new ones. For recreation, many built ice boats that were powered by airplane engines; a few were VW powered. There were also many sailboat enthusiasts, and I was given several rides on motorized ice boats, sol know that with hardly any resistance, they fly. Photo by Karl LaLonde, 42 RADIO CONTROL BOAT MODELER ~SAILER ON THE ROC [E REFRESHMENT WINTER 1989 43 ICEBOAT:s Are you thinking yet? I hope my nostalgia will trigger positive thoughts that lead to your involvement in winter-time boat modeling. Several classes of ice boats are raced in the northern part of the U.S. and in Canada, and this article describes the Skeeter. For power, you have two basic choices: motor Ready to skate, the Iceboat is streamlined, functional and fast. power or wind power. You probably have an airplane engine left over from the days before you discovered model boating. Now, all you have to do is to build a boat to go with that engine, and there are several swamp-buggie boats on the market that work very well on ice and snow. I have two that I run in the summer and in the winter, but swamp buggies don’t handle very well when it’s really windy, so on windy days I go sailboating on the ice. Not knowing much about sail-driven ice boats, I did some research at the library. I had no idea how they were made, how the runners were attached or sharpened, or how big the sail was in relation to the size or the shape of the boat. I found only one book, “Sailing on Ice” by Jack Andersen (published by A.S. Barnes and Company, Inc.), but, fortunately, it contained all the informationI needed for the building project. Built entirely of balsa, and looking roughly like an airplane fuselage built backwards, the body went together in one night. Braced for inner strength, the body was the easiest I ever built. The blades are made of 4-inch-thick steel, cut with a hacksaw and shaped Steer- able nose blade is very effective and simple to rig using standard R/C airplane fittings and linkage parts. and sharpened with a grinding wheel. The final sharpening was done with a file, and, since it’s very important to keep the runners sharp with no burrs on the cutting edge, after filing the edges, I always use a piece of emery cloth or wet-and-dry sandpaper to finish the sharpening and smooth out any burrs. The runners were sharpened to a knife-like edge, at a 90-degree angle. If they’re too sharp, they’ll cut into the ice instead of riding on top as they should. For the sails, I used Mylar (the kind draftsmen use), as it sews easily and can be cut to shape with an X-Acto knife. Some hobby stores carry masts, but if yours doesn’t, a piece of old TV antenna from a junkyard will do nicely. The Skeeter didn’t run Above: Ultra-strong Futaba FP-S25 sail servo is used to control the sheet. Battery box is located next to servo for easy access. Right: Only two servos required, along with surface frequency radio. Standard-size Futaba FP-S148 servo used for steering. 44 RADIO CONTROL BOAT MODELER perfectly the first time out, as it was too light for the wind, but when I’d added some weight (almost 1 pound), it went like a rocket. An ice boat is certainly the fastest machine without a motor; it goes like the wind, but three times faster. Winter boating is fun; go oO for it! SHROUD e @ MAST -@ BATTENS SAIL Ne | cont FORESTAY Se oe STEERING RUNNER SHEET LINE a bs OU Qo 37″ < 46° > 7″ te ICE BOAT ’88 PA i Xs ea RUNNER PLANK = ul e S SPRING BOARD ) mr aaE mmf RADIO/SERVOS ine= 7 Cut STEERING CABLE Inked Original Plans WINTER 1989 45





