US Boat and Ship Modeler : 4TH Quarter 1989

  • Title. Author. Summary
BY ROD CARR 4 ; ¥ ee é pee aed i Pal fe | Ane tS ‘ Cape Town, South Africa model yacht club’s local lake located about 27 km from downtown Ca pe Town. Can you imagine sitting on the veranda with a transmitter in one hand and a cold quinine in the other? Photo by Colin Farlam. ne of the very enjoyable aspects of writing this column is having the opportunity to see and learn about the individual boating activities that are occurring in the shops of other skippers. Reports on projects completed or underway are more often than not accompanied by photographs which are really worth the proverbial thousand words. A particularly interesting selection has come to my ‘in’ basket and they form the basis for this contribution to the model yachting literature. From New Zealand we get a look at the International EC/12 models sailed by Paul Chisholm. Paul and I have been working together on the Executive Board of the International EC/12 Class Owners’ Association. 42 SUMMER 1991 This is the body which maintains the International Rule for the East Coast 12 Meter class. KZ-7 sports the color scheme of the famous KIWI MAGIC (Right) Irl Whitten’s STAR 45 takes advantage of the “SWANG RIG” to move downwind under complete control. (Below) Mast heel area show Irl’s craftsmanship to advantage. Clean, neat and strong. SWANG RIGs ought to multiply like rabbits in a carrot patch. Irl Whitten photos. – és 4 ¥, ° International EC/12 Class models belonging to Underbody of cutter shows dual fin support for Bob Pridemore’s 36-inch scow; from top is the New Zealand’s Paul Chisholm. Hulls grandfathered by International Rule, rigs updated and outside keel ballast with rudder hung on aft end first null, the mold and the computer controlled of fin. Boat designed to sail free and have maximum longitudinal stability. Greg Strand photo. and cut plug. Bob Pridemore photo. for fixed backstays. There doesn’t look to be too much room in the hull, but ’m sure that Greg will come up with some way of handling the jibs that are flying from the bowsprit. If you have any suggestions for him, write to him directly: Greg Strand, 2 Fairfield Drive, Avondale Est., GA 30002. Colin Farlam, from Cape Town, South Africa, sent a photo showing his club’s sailing site about 27 km from the center of Cape Town. That showing complicated panel patterns. Paul Chisholm photo. which made such a name for itself in the 1987 America’s Cup match. “Kay Zed Seven” has some very nicely shaped horizontal paneled sailed. Her stable mate KZ-14 wears a beautiful suit of multi-paneled sails. Look at the intricate pattern in the lower half of the sails. Of interest on both boats is that they have modified the “barn door rudder” that is common on American AMYA Class EC/12s. For further information on the International East Coast 12 Meter Class, and to join the United States IEC/12 Class Owners’ Association, looks downright pastorale!! I would like to have some further details on the purpose of the skijump located in the shallows. Colin also reported on the 1990 South Africa National Championships held on Blue Lagoon Pond in Durban. The RM class was topped by 8S. Schulze. R10R was won by P. Simons, and a locally designed send $10.00 to the Class Secretary, Ron Banner, 115 – 17th St. S.W., Puyallup, Washington 98371. Mr. Banner reports a brisk business in new members showing that there is interest in our country in Interna- tional model yachting. ANTIQUE CUTTER Greg Strand, of Avondale Est., Georgia, sends pictures of an antique gaffrigged cutter that was built about 1936 in Massachusetts by his grandfather. He is restoring it, and is well along judging from the swimming pool shot. The boat weighs 26 pounds, has an overall length of 69-inches and a beam of 13-1/2 inches. I would judge her LWL at about 30 inches. She has enough sail area to make Omar the Tentmaker envious. Her hull form appears to be of the “skimming dish” variety, very beamy and flat. To balance the press of canvas, a keel weight is slung from a double fin arrangement. This was a way of reducing wetted surface, but may have actually increased the drag of the underbody of the hull. Greg is rerigging the boat, including making provision for some strong lower shrouds that will act as nonadjustable running backstays. They will be led to the rail about six inches aft of the side stays. The rig, with its large gaff mainsail, does not allow (Right) Whitten’s 36/600 {4 shows the effects of the [aig deck-hugging sail plan. jig: Clean and crisp, no & tangle of wires and § adjustments. (Insert top) Whitten rotating mast fe fitting eliminates vang [ag and other swiveling parts. Sail moves to leeward of mast and should give improved airflow on the beats. fF (Insert bottom) Whitten’s jib swivel is simplicity to the max. Fishing swivel, a rubber grommet, anda; ~ jib rack that is light and easy to deal with. Irl Whitten photos. US BOAT & SHIP MODELER 43 HAYES WHIP ANTENNA Vertical whip antenna replaces any 18 or 36-inch receiver antenna for R/C cars and boats. Connec tors, vertical and horizontal ‘mounts and safety ball all included. Stainless spring steel whip only 1/32 diameter for \ minimum wind resistance. Available at your / o e 14325 Commerce Wy. Garden Grove, CA 92643 PLANS CATALOG uae NOW 192 pages chock full of illustrated plans of every type ship, boat, and vessel, including naval warships cf most major nations—Civil War, pre-WWI, WWI, WWII and post-WWII. Also wooden warships from early times to late 1600s. If the plan is commercially available and TAUBMAN PLANS SERVICE ‘‘don’t ain’t got it’’ then probably nobody ‘‘don’t ain’t got it.’ PLUS — Books; Steam Plants: P-O-F Wooden kits; R/C Supplies; Info on Scale and Metric Scales; How and Where to Research; Updated listing of Clubs & Periodicals. P-L-U-S Handbook #2 from Eng. ALL THIS FOR ONLY $6.50 P-L-U-S SHIPPING: Class $3.00: 3rd Class $1.50 Can. & Mex.:—Airmail $5.00: Surface $3.50 So.Amer. & Eur.:—Airmail $10.00: Surface $4.00 Pacific Area:—Airmail $13.00: Surface $4.00 Those wanting additional plans for WARSHIPS, LINERS, and MERCHANT MARINE send an additional $1.00 for the Wiswesser catalog. TAUBMAN PLANS SERVICE INTERNATIONAL 11 College Drive — #4G Dept. RCMB Jersey City, NJ 07305 (when sending inquiries, please use a S.AS.E.) 44 SUMMER 1991 can be brought to keep air from sneaking under the booms. Sails are yellow Micafilm. But of course one good idea leads to another, and Irl has gone on to produce what he calls a “SWANG RIG.” This is a swing rig that constrains the mast to not rotate. The effect is seen in the photo showing STAR #182 proceeding downwind in a business like attitude Ferguson, MO 63135. Bob sails with the St. Louis Eagles, who have a strong fleet of 36/600 boats. Bob started with the scow plans we published in the Fall 1988 U.S. Boat and Ship Modeler, reduced the length to 36 inches and admits to having adjusted the lines a bit too. He drew his plans with a computer CAD program at a computer tape HAYES PRODUCTS Domestic—1st total of 39 skippers sailed in the three classes over a seven-day schedule. I was very pleased to hear from Robert Pridemore, 738 N. Elizabeth, Hazlewood, Missouri, where he works. Ken Stimac helped make j ; a. lifting it out of the boat. No shrouds, no vangs, no backstay, no mess. And just look how close to the deck the rig with all her washing hung out to catch the breeze. The key to the system is a Central Pattern Company in local dealer. a! 36-inch One-Design class called the Shipmate, was won by S. Schulze. A to feed to a CNC milling machine, and when the milling machine was fed a chunk of wood, it obediently turned out the plug for the new 36 inch SCOW. Swiveling Pe hee ar- rangement that allows the main boom and jib boom cantilever to rotate underneath the mast, while the mast itself is prevented from rotating by the shrouds and spreaders. The AMYA class rules for this class specifically prohibit the rotation of the mast, as do the AMYA EC/ Bob says that he would be willing to write an article about the 12 rules. But Irl process that prohas shown that duced the hull youcan hold the Pridemore 36 inch scow underway shows the unique and I have told bow sections that make scows so unique. Note that mast still and him we would all main is being held in quite tight to induce heeling of yet obtain the be very inter- the hull thereby reducing the wetted surface and letbenefits of the ting her move faster. Bob Pridemore photo. ested. He also SWANG RIG. said that he was Want to bet that open to producing a limited number this arrangement appears at AMYA of hulls, so if you have an interest events in 1991? In my opinion, any contact him at the above address. system that will guarantee wing-andOne photo shows the little beauty wing when going down wind without on the water. Her skipper says that needing to play with the transmitter she does best when it breezes up, and is going to be jumped upon by everythat she is a bit slow in the super body who wants to get to the finish light stuff. Still, you’ll have no trouble line first. picking her out of the fleet. Thanks to all who contributed to Irl Whitten continues to explore this column. We are appreciative of the technology of sailing and shares your willingness to share your ideas. his discoveries with everyone. He also I look forward to seeing your projects sent along the photos which show his on the building board, in the work latest experiments with simple but shop, or on the water. So take a effective fittings. The gooseneck couple of snapshots with an unclutprovides for rotation of the whole tered background, and tell us a bit mast, with the jib set on the tradiabout what you are up to. So far we tional forestay but terminating at have been able to publish all contrithe mast head. Jib rack is a series of butions and I hope you’ll take the forward facing hooks. Changing the bait. Send to: Rod Carr, 3011 – 177th rig means unclipping the sheets and Ave. NE, Redmond, WA 98052 ° publication, I find it difficult to imagine that you have had even one letter of complaint or request for clarification about his technical expertise or articles. However, i have felt the need to write to you for some time with regard MAIL CALL Dear Bill, In all the years that Rod Carr ha: been writing quality articles for YOU Mi eM to another matter. Many AMYA members and EC-12 skippers are upset because of the adoption by IYRU-MYRD ofrules for an International EC-12 Class after a wide majority of AMYA members indicated that they were not in favor of the new rule. Since AMYA boats do not comply with the new TYRU-MYRD rules and vice-versa, there is a great deal of confusion and outrage among existing members andprospective new members. Unfortunately, Rod Carr played a prominent role in creating this situation. Now to my point… I have enjoyed Rod’s articles as much as anyone. What really aggravates me though is the paragraph at the end, or the clause in the middle, ofRod’s “Strictly Sail” column about what agreat rule IYRUMYRD has and what a terrible rule AMYA has. That is simply not the case. I cannot believe that you want your contributors to take positions such as these when a large number of your subscribers are AMYA members. My request is that, as editor, you request that articles be devoted to the important technical information that Rod provides and to leave the editorializing to you, the editor. If you believe that AMYA has done a fundamentally poor job in the administration of its duties to its members, then use the “Cap’n’s Log” column to tell your subscribers about it. If you feel this is the case, then come out and say it… but please don’t sit back and let comments like this get into your fine te An inside look at one of Bi umwalt’s tugs. Looks busy! Technical Columns truly technical. With this exception, you have atruly wonderful publication and keep up the good work! Regards, Glenn Chalder, EC-12 Class Secretary, Simsbury, CT. | As you can see, Glenn Chalder can take the blame… or credit… for getting this department started in U.S. Boat & Ship Modeler. We’ll give Rod Carr equal space in the next issue of USB&SM to respond to Glenn. But in the meantime, Chris Jackson, Reigate, England, editor of Model Yachting News, has some things to say about the same subject in his letter which is primarilly an expla- nation ofthe question we raised about the what, who, and where, of NAVIGA. NAVIGA BACKGROUND AND HISTORY “The Naviga organization has been in existence for some 30 years, and this grew from the mid-European nations after WW-II when the hobby of model making began to cross boundaries and the need for some common rules for competition became obvious. “The first nations to push the idea all spoke German, and some were in the Eastern Bloc, in which the governments were promoting model making and competition through schools and cadet and army, to give the young population a creative interest. As you know, the Western nations’ governments take no interest in the model hobby, and so less money is available for a big governing body. “Naviga made good use of the income from the many affiliated modelers, to set up excellent sections to cover all forms of modelmaking, formed rules for everything from Static Scale, Sailing Scale, Power Speed, and Sailing. “Naviga’s rules were gradually accepted by more and more nations, if only because they were already set out, by modelers, and if you wanted continued on page 52 publication without your approval. I do not mean to deprive Rod of the opportunity to use boat examples in his writing because those examples are what gives his column such widespread applicability. What I think is important though, is to focus on the technical issues and leave the legislative and administrative issues to the appropriate entity. I would be the first person to defend freedom of speech and freedom of the press. However, I do not believe that these issues apply in this case. You, as editor, need to determine the context of the magazine and the applica- bility of articles. Leave the editorializing in the Editors Column, include a Letters to the Editor column (and make this the rst letter if you like), and make the Richard Banks’ R/C model of the Revolutionary War Bushnell submarine “Turtle,” the first submarine used in combat. Look out, Jules Verne! US BOAT & SHIP MODELER 9