- The “A” Class Sharpie and how to build her “K.N.” Part 8 BY H. B. TUCKER
- Radio Control Regattas POOLE LAKE June 12-13, 1954
- The new “M” Yacht “STARDUST” By S.Witty STARDUST was designed principally as an answer to Sunkiss and as such is an attempt to combine the main advantages of this and other hull forms in such a way as to make any form of sliding rig unnecessary.

TWO SHILLINGS AUGUST Ss ; 2 THE GRANO BANKS 1954 REGATTA PHOTO PAGES SECTION | Model Yacht & Radio Control Kegattas at gel ye This, the first M.Y.A. National Championship to be held at Poole was a very successful event. There were 30 entries, some from as far away as Birkenhead and Great Yarmouth. The wind varied from very light on Saturday morning to almost a gale with rain on Sunday morning. On Monday it was variable but mostly called for a beat and a run. Sailing was very close and a good sporting spirit prevailed throughout. On Saturday evening a dinner was held at which over 100 people were present. Yachts and competitors ready for another heat in the finals. Mr. D. Batey’s “ Cherie II” built to Mr. Littlejohn’s latest design. * Dorish”’ the winner, going well in the finals. The Mayor of Poole, with the Mayoress, who presented the prizes. Mr. A. R. Litton, of Exeter, O.O.D. in the background, and on the extreme left ‘‘ Jimmy ’”’ Edwards, of Birkenhead, the oldest competitor, who secured Sth place. The winner, Mr. W. H. Wareham, of the M.Y.S.A. London, and his mate. Mr. B. H. Tucker with “ friend’? were interested spectators. ** Ducks” put up a good show. His Mr. D. G. MacDonald, of South London, who won second place with ** Jemima Duck.” «M’ CLASS NATIONAL CHAMPIONSHIPS AT POOLE JUNE 5—7 a Some impressions of the Poole Regatta by J.C. Hogg who pioneered the sailing of yachts under Radio Control Radio The two day Radio Control Regatta staged by the Poole Model Yacht & Power boat Club on June |2th and |3th, attracted a record number of entries. In spite of the weather which in no way helped the proceedings, one is left with some very favourable impressions. First, there was a good sporting spirit about, with competitors obviously willing to show and explain their equipment and to give help and advice to the newcomers. This in itself is invaluable at a meeting of this kind. Those who Control Regattas experienced trouble with their models took it all in good part, even though it was clear that the heavy rain before the contest had prevented many from tuning up their gear after their journeys to Poole from all parts of the country. ° POOLE LAKE receivers with a round dozen; home-made equipment (some); commercial equipment June 12-13, 1954 1. Col. Bowden’s and G. Honnest Redlich’s *°4” class yachts going well under independent Radio Control. 2. A gallant rescue by a youngster who braved the cold to retrieve the tug which foundered. 3. The Radio Gear in Mr. J. C. ““M”’ class yacht. The number of craft assembled was very satisfying, especially when one recalls the difficulty only some five or six years ago in assembling more than half a dozen operational R.C. models. At Poole there were half a dozen sailing yachts alone, ranging from 36 in. to ‘‘A’’ Class, and the power craft were numbered in dozens. The increased numbers brought variety. There was variety in radio: transmitters which could be held in the hand, transmitters on tripods; receivers with one valve and Hogg’s 4. A fine model M.T.B. *‘ doing her stuff.” (many); and above all a variety of ideas—whether in theory or in fact—ideas in plenty, which augurs well for this growing aspect of the model movement. The quality of the modelling varied too. Some hulls were obviously containers for R.C. equipment while others reached a high standard of design and finish. The problem of sending out detail models in choppy weather was well faced. It shows a fine spirit to send off R.C. models under such conditions. A very sporting attempt by the owner of a fine tug showed what can happen; realistic to the last, she went down stern first, some fifty yards out. One admired too, the little naval frigate which during a calmer spell set out and performed very reliably—and oh, how she rolled ! The number of ‘‘ out of control ’’ and non-starters was fairly high this year and an analysis of the reasons for the faults shows that the number of i.c. engine troubles almost equalled the numbers due to radio or intergear. There was the difference between the workshop bench and the choppy lake. It is also possible that the five minutes starting limit was a contributory factor. Other faults were attributable to last minute improvements or alterations. These are a hardy annual in most competitions, but in radio control work they very often lead to trouble. There were several failures due to servo mechanisms sticking. Four of five of these were of the screwed rod and runner type. The sticking of relays and contacts was less in evidence, perhaps due to the wider use of spark suppressors. Radio faults seemed relatively few, though at least one aerial was affected by rain. Although faults have purposely been mentioned in some detail (for the benefit of others) there was quite clearly a marked improvement in the general performance of the models. Several i.c. driven boats had speed control which greatly added to their performance—though some competitors might have saved points by slowing down at the more difficult turns. One small launch had a controlled centrifugal clutch which enabled it to be slowed down and stopped with the engine running. The steering of the higher speed boats also showed that good control had been achieved. This was typified in the ‘* Novelty Competition ’’ when one boat leaped at speed a small half-submerged ramp three times in succession. Although there were twelve entries for the latter event the results with the exception of one or two were not as spectacular as had been hoped. Its purpose was to bring out originalty and to give spectators a change; a few ‘‘ stunts ’’ can bring out the lighter side of radio control. The electric powered boats showed what could be done with full engine control and fully proportional steering, making up in accuracy what they lacked in speed. AUGUST, 1954 SHIPS AND SHIP MODELS One which came up without hesitation and stopped, bows on to a moored buoy would have done credit to a trained crew. There was plenty of interest in the event in which two ‘‘A’’ class yachts raced simultaneously. Watching the yachts jockeying on the starting line, waiting for the gun and turning tack and tack about on the windward leg of the triangular course left one in no doubt as to the popularity of this event and the growing support which it will receive, Thinking over the Regatta, following the presentation of prizes by the Mayor and Mayoress of Poole, one felt encouraged by the fact that so many of the early enthusiasts of ten and fifteen years ago are still actively supporting this hobby; that newcomers are entering the field in increasing numbers; and that year by year, steady progress {= is being made in the radio control of models. Radio Regatta at Victoria Park The first radio control regatta ever to be organised by the Model Power Boat Association was held at Victoria Park on Sunday, June 20th. This was a milestone in the history of radio control, and we are very pleased to see such an influential body as the M.P.B.A. supporting it in such a practical fashion. The Model Yachting Association is also considering rules for sailing under radio control, so that it would appear that radio control is gradually coming into its own. There were eleven entries and although this may not seem a large number it must be remembered that the entries were confined to members of clubs affiliated to the M.P.B.A. and that the racing of hydroplanes has hitherto been perhaps the chief interest of the Association. The programme consisted of a Set Course event and a steering contest. The winner in the Set Course event was Mr. W. Warne, with his Daniels’ designed cruiser Amazon, Mr. R. Curwen coming second with Vanessa and Mr. L. R. Wood third with Margaret. The steering competition proved difficult to many of the competitors as the course was somewhat tricky; but ultimately the winner was found in Mr. L. R. Wood’s cruiser Margaret, after running off a tie with Mr. R. P. Such. R. Curwen, V. Gascoigne and J. Gascoigne tied for third place. VICTORIA PARK SUNDAY, JUNE 20th, 1954 PHOTOS AT VICTORIA 1. General view Judges’ tent. of PARK enclosure 2. One of the boats in Contest. with the Steering 3. A close shave. The buoys at the starting point presented a problem to many competitors. 4. The “* Margaret”’ put up a particularly good performance in the Steering Contest. 5. Mr. A. G. Waller’s ** Golden Eagle ”’ is now fitted with Radio Control. 6. Mr. R. H. R. Curwen’s cabin cruiser ‘“‘ Vanessa”? is fitted with a 15 c.c. 4-cylinder “‘ Seal” engine. 7. The winner in the Steering Contest Mr. L. R. Wood’s handsome cabin cruiser ** Margaret” We are continuing with Regatta Reviews throughout the season, Next month we hope to publish illustrated reports of the Radio Control Regatta at Birmingham and the Prototype Sailing Regatta at Hove. The new a ee WM elass WLI2 Yacht = are WLY. ——— 8, { MIN. RADIUS 6 “STARDUST”: BY y A I~ “ORM S. WITTY = This new design is now included in our Plans | Service under Ref. No. SYI8. ‘ It consists of one sheet 53 in. x 28 in. the size, lines and drawn the full | price is I7s. 6d. Other | } ‘““M”’ class de- signs in our list are SY7 the ‘* Falcon,’”’ by A. W. Littlejohn, price I7s. 6d. netand SYII, the ‘‘ Mosquito,”’ by H. B. Tucker, | | | | | | | price 30s. Od. net. 3 TARDUST was designed principally as an answer to Sunkiss and as such is an attempt to combine the main advantages of this and other hull forms in such a way as to make any form of sliding rig unnecessary. The form of canoe body used in the design makes full use of the rules, the deep bow sections being a feature of most classes where only overall length is specified and is undoubtedly very fast in spite of having a certain amount of unbalance as far as the in and out wedges are concerned. Due to this the hull is not dynamically balanced in itself and has a tendency to turn up into the wind so that in order to counteract this effect several opposing forces must be brought into play if a sliding rig is to be avoided and these are mainly :— (1) The use of a conventional fin so that the root trailing edge is placed well aft of the centre-section. (2) By placing the skeg and rudder in the most effective ———- 300 4 5 6 7 8 E} 10 LU {2 INCHES position in the garboard stream. Roughly the idea is that to obtain a force tending to turn the boat. off the wind both appendages (i.e. fin and skeg), should move towards the place normally occupied by a full keel and in fact to give the same effect but with a considerable saving in wetted area. . (3) By designing a more gradual run. It is a known fact that an abrupt run can in itself create a strong tendency to turn into the wind, Just why this is so, is not readily apparent, the usual explanation given is the case where a yacht balanced in itself will turn into the wind when towing some small object or dinghy at the stern. As the run has been given really careful treatment the bow lines must be coarsened to some extent in order to compensate for this but the for’d waterlines still retain a fine angle of entry inasmuch as “‘ Marbleheads ” being fairly long and light need a fine bow in order to get to N o>) oe WLi2 BUTTOCK 4 BUTTOCK 3 a Seer 8 | BUTTOCK 2 et BUTTOCK | res ee ese pags pace] gatas. NSed W.LI2. BUTTOCK 4 BUTTOCK 3 * Ses) Si, ae ele ee ea INS O SAIL PLAN ae BUTTOCK 2 ies] a! BUTTOCK 1 DIAGONAL 2 DIAGONAL 1 DESIGN ay ne Semes FOR ‘M’ CLASS YACHT BY S.WITTY windward if the water if at all ‘choppy. The sail plan is as can be seen well balanced, the extra length of jib foot making for an easily tuned and handled boat. There is in my opinion no doubt that the length of jib foot also has a decided effect on the aspect ratio of the sail plan considered as a whole and therefore should be taken into consideration when draughting. On this basis an aspect ratio of about two seems to work out the best for all-round performance. A kicking strap is used on the jib, as this is the only way to obtain positive control of the leech and if combined with a thumbscrew micro adjustment on the after end of the boom full control can be obtained not only of the leech tension, but also of the amount of camber in the sail foot. The balance of the hull body itself has been kept within reasonable bounds by using a well veed transom and the DRAUGHT ………. 10:5 BEAM 2 LEAD. …._.-.14-5 Ibs PERCIVAL MARSHALL & CO.,LTD 19-20.NOEL STREET, WI! SY18. adverse buoyancy movement when heeled at 20 deg. amounts to only 0.4 in. One of the inherent advantages of this type of hull is that when running there is no tendency to bore, due to the quarters being wide enough to develop sufficient suction to counteract the pressure of the high sail plan. It is a fact that most yachts with fine quarters have a tendency to bore. With a total displacement of 21.3 Ib., the amount of lead specified can be incorporated in the keel without skimping the hull strength and will allow a few ounces spare for trimming ballast if necessary. As will be evident by the summary of design points, the ‘‘ Marblehead ”’ formula has been used to the fullest extent as is inevitable in progressing to any ultimate form of design. If this boat is being built for radio control suitable allowance should be made in the lead keel. 301 7 3 | The “A” Class Sharpie x and how to build her must be threaded for about } in. at the bottom, and for 1{ in. or 2 in. at the top. When buying the rod, get brass washers, nuts and butterfly nuts to suit, also a short length of brass tube that just takes the rod. The latter will form the tubes through the hull. Screw a small brass nut on to the bottom of each rod, and as these nuts form permanent stops, the ends of the rods can be burred over to prevent their moving. Hold the rod in the vice jaws immediately under the nut to avoid distorting the rod, and tap the top with a hammer until the metal is sufficiently burred over. In our drawing of the detachable keel (Fig. 13) see July issue, page 265, the nuts at the lower ends of the rods are shown sunk into the lead. This must be done later, but for the moment, we are going to use the bolts to cramp up the fin during gluing, so spare washers should be put above the nuts to avoid damaging the wood. Our first step will be to glue the bottom six and a half layers of the fin together. The two } in. layers between W.L’s 6 and 7 are temporarily screwed together at the moment. Leave them like this until we are ready to take the screws out. Temporarily assemble the layers up to W.L. 7 on the keel-bolts and check their alignment. Make packing pieces of spare bits of wood to fill up the bolts. Disassemble the fin for gluing. As the glue does not start to set until it is in contact with the hardener, all these fin joints can be made in one operation. The keel-bolts automatically position the layers so there is no lining up to do. Use the thinner edition of the glue, which incidentally makes a joint of exactly the same strength. Thinly coat the upper faces of the layers to be joined with resin. Put the keel-bolts through the bottom layer. Take the next layer, and coat its lower face with the hardener. Since the latter is liquid, this takes only a few seconds. Drop this on to the keel-bolts in position, and deal with the remaining layers in succession. The packing pieces are put on, and the whole bolted down firmly. It will avoid damaging the butterfly nuts, and also permit you to get more pressure if you use spare nuts and washers, and tighten up with a spanner. How long you have to do this depends on the hardener in use and the room temperature. These particulars can be seen in a leaflet which you should get when you buy your glue. Read the instructions carefully and follow Continued from Fuly issue page 265 304 —: G Me keel-bolts are made of + in. brass rod. They BY H. B. TUCKER them explicitly, and you will get unbreakable joints. Wipe off superfluous glue before it sets, as otherwise it is difficult to get rid of and blunts tools. The two } in. layers have to be glued in similar fashion on top of W.L. 8, but the } in. layer is a temporary substitute for the brass faceplates, so must not be glued. For the sake of clarity, I will refer to the upper part of the fin which forms the centre member of the keel assembly as the upper fixed fin. It will also have been noticed that I have throughout referred to upper layers and upper faces, and to the top and bottom of the keel. In every case I mean as these are with the boat right way up. She is, of course, built upside down, but it avoids confusion if one uses the same terminology throughout. Assemble the upper and lower parts of the fin on the keel-bolts. The $ in. temporary layer should of course be in position between them. In preparing this, all that is necessary is to drill the bolt-holes. The wood will be shaped as the rest of the fin is carved. To hold the work during carving, a piece of wood about 1 in. thick is screwed on to the upper face between the keel bolts. This can be held firmly in the vice during our next operations. The fin itself now looks like Fig. 15. With a small plane and paring chisel, carve down to the lines, but stop when about +; in. from them. The remainder of the work is done with glasspaper. Start with fairly coarse paper, and finish with OO. Wrap the paper round a flat piece of wood and work diagonally to avoid the joints standing proud. As you proceed, stand back from the work from time to time and look at it from all possible angles to be sure you are fairing it properly without flats, hollows or bumps. It may be awkard in the immediate vicinity of the keel-bolts on the bottom of the fin, but this little bit Gan be done later. For carving the garboard angles where the fin joins the hull, cut cardboard templates of sections 5, 6 and 7. These should be offered frequently to the hull as you work. (See Fig. 16). SHIPS AND SHIP MODELS AUGUST, 1954 Sak eS: besSi [a t mor As Fig. 15. s Layers of the fin glued together and ready for finish carving Fig. 16. After carving the fin, take the two parts apart, and our temporary + in. layer is ready for use as a template for cutting our brass faceplates. Cut two pieces of +; in. brass about } in. longer than our template and the same amount wider. With a scriber draw a centre-line. On this line by carefully measuring the centres, position the holes for keel-bolts, and drill accordingly. Check these in position. You can also position and drill the holes for the locating studs. The position for these is not critical, the only stipulation being that they must coincide in the upper and lower faceplates. Secure the template to the brass, using a couple of # in. bolts through the bolt-holes. Please note the bolts must be the right diameter. Then run a scriber round the template. The brass is then cut out about + in. outside the marked line. A piercing saw or metal cutting fretsaw can be used. The faceplates are finally trimmed down with a fine file, but this can be left until they are fixed in position. The holes for the screws which hold the faceplates to their respective faces should be drilled and countersunk. The screws are positioned approximately as in Fig. 15. Once more assemble the fin parts, including the faceplates, and check the extreme depth from the top of the upper keel to the bottom of the fin. If this exceeds 84 in. forward or 8} in. aft, this has to be adjusted by taking a little off the bottom of the fin. This is very important since even a small fraction of an inch may throw the boat out of rating, and excess draught is very heavily penalised. In order to save time, the pattern for the lead keel can be finished and sent to the foundry for casting. The lead line on the plans is for normal sailing with vane steering. If the yacht is to be used with radio control, a keel 44 lb. lighter, with the c.g. further forward, is required. To get the lead line for R.C., measure 1 in. forward along the top edge of the lead keel, and draw a line parallel to the after side of the original lead keel down to the bottom. Both keels are designed to cast a ‘small percentage overweight to allow for cleaning-up, and any necessary adjustment in the fore-and aft balance Showing template used in carving fin on both sides of the fin. The fact that the two } in. layers have not been glued together now comes in useful. Draw a second line parallel to the lead line but 4 in. forward of it. Cut off the pattern with a fine toothed saw, sawing between the lines. Finish both parts to the marked lines. Glue a strip of wood % in. thick up the after side of the lead pattern. Test the pattern with the keel bolts. When all is correct, the pattern is ready for the foundry. Before sending this to be cast, however, take two spare pieces of fs in. rod. These should be long enough to pass right through the pattern and project a good inch at each end. Insert these in the pattern. By using these pieces of rod as “ cores,” the founder will cast your bolt-holes in the lead, which will save you the difficult task of drilling the lead for the bolts. The faceplate has to be fixed to the upper part of the fin. Give the wood a coat of priming paint. When this is dry, give a thick coat of white lead paint, and while this is wet, put the faceplate in position. Be sure the bolt-holes register exactly, and then screw into place. While the white lead is drying, you can glue the upper 4 in. thick layer on to the lower part of the fin, but do not attempt to fix the lower faceplate yet. The next step is to fit tubes through the hull for the keel-bolts. Open out the holes through faceplate and hull so that they will just clear your tubes. Test with the keel-bolts and what is left of the lower part of the fin to see you are still in register. Take the layer and place it on something hard. A flat iron held upside down in the vice by its handle would answer. With a punch and hammer, gently bell out the bottom of the tube slightly until it is a fixture in the faceplate. Your tubes should have been cut about 7 in. extra long by the way. Now turn the layer over and bell the top until it is a fixture in the wood. Drill holes + in. diameter and about 2 in. deep through the stud-holes in the faceplate into the bottom of the wood. Squirt oil into these holes until the wood becomes saturated. Since this wood cannot be painted, the oil will protect it, and will also prevent the studs sticking. of the yacht. Whichever lead line is being used must be put in (To be continued ) 305




